0187 eaia data access error lenovo как исправить

My computer is ThinkPad E580. The recent computer is broken, the following is the specific situation:

One day noon, I opened the computer and after the screen showed the Logn of Logn, it appeared — I have never seen my computer like this, it also brought me the inconvenience and spirit of life and spirit and spirit.moneyThe loss, of course, this is the later.

It is long (at the time, three errors, not this picture, this is taken):

At that time, I didn’t take it when it is one thing. Press the ESC button to enter the system. After entering the system, the error prompt appears, as follows:

By the way, I haven’t figured out this is what this is what I mean. I know the troubles of the comment area, tell me what is going on, how to solve it.


I haven’t taken this way, I will continue to operate.

There is lesson in the afternoon. Wait until I have finished the class back to the dormitory to open the computer and want to continue to complete the Cosa Nostra.1 After the screen shows the Logn of the Logn, the three errors come again. Different, this time I press the ESC key to enter the system, I will check the three wrong solutions, the result and There is no harvest.

Find able to enter the BIOS, so F9 restores the BIOS default setting, the F10 saves exit, and then only 0187 errors are found after reboot. Continue to check 0187 error:

0187 Error: EAIA data access error.
Cause: The access to the electrical erasable read-only memory (EEPROM) failed.
Need to be repaired to Lenovo service outlets.

It seems that this is the problem of the motherboard, what is it, I will not repair the motherboard at all, so I can only give up first.

Even I also sent a blink: https://blink.csdn.net/details/1179715

Since my school is still in the seal school (🐎 ), I don’t want to misunderstand less, I can only have a computer life in a few days, and I don’t spend too much money, mainly my poor, really not much money.

I finally waited until Saturday, please go to repair the computer, I have reached the recent Lenovo service store. Since the number of the computer is found is chaos, the maintenance master is trying to brush the main board, but it can only change a motherboard.

About a total of 1500.


  1. Nothing, it is written to this brain and suddenly want to play a stalk. I don’t want to change it, so I do this :)↩︎

инструкции

 

To Fix (0187 EAIA Data access error Lenovo Twist) error you need to
follow the steps below:

Шаг 1:

 
Download
(0187 EAIA Data access error Lenovo Twist) Repair Tool
   

Шаг 2:

 
Нажмите «Scan» кнопка
   

Шаг 3:

 
Нажмите ‘Исправь все‘ и вы сделали!
 

Совместимость:
Windows 10, 8.1, 8, 7, Vista, XP

Загрузить размер: 6MB
Требования: Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Limitations:
This download is a free evaluation version. Full repairs starting at $19.95.

0187 EAIA Ошибка доступа к данным Lenovo Twist обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have 0187 EAIA Data access error Lenovo Twist then we strongly recommend that you

Download (0187 EAIA Data access error Lenovo Twist) Repair Tool.

This article contains information that shows you how to fix
0187 EAIA Data access error Lenovo Twist
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to 0187 EAIA Data access error Lenovo Twist that you may receive.

Примечание:
Эта статья была обновлено на 2023-05-22 и ранее опубликованный под WIKI_Q210794

Содержание

  •   1. Meaning of 0187 EAIA Data access error Lenovo Twist?
  •   2. Causes of 0187 EAIA Data access error Lenovo Twist?
  •   3. More info on 0187 EAIA Data access error Lenovo Twist

Meaning of 0187 EAIA Data access error Lenovo Twist?

Ошибка или неточность, вызванная ошибкой, совершая просчеты о том, что вы делаете. Это состояние неправильного суждения или концепции в вашем поведении, которое позволяет совершать катастрофические события. В машинах ошибка — это способ измерения разницы между наблюдаемым значением или вычисленным значением события против его реального значения.

Это отклонение от правильности и точности. Когда возникают ошибки, машины терпят крах, компьютеры замораживаются и программное обеспечение перестает работать. Ошибки — это в основном непреднамеренные события. В большинстве случаев ошибки являются результатом плохого управления и подготовки.

Causes of 0187 EAIA Data access error Lenovo Twist?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «0187 EAIA Data access error Lenovo Twist» error is a failure to correctly run one of its normal operations by a system or application component.

More info on
0187 EAIA Data access error Lenovo Twist

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

I get the same error on a brand new Lenovo Thinkpad S540 (+-1 month old).
Ошибка Thinkpad T43: «ошибка доступа к данным 0187 eaia»

ноутбук полностью отказывается загружаться. Сегодня это даже хуже,


Ошибка — OE: 0187: BFF8E64B

Had a similar problem once on an ME system…a ‘dirty’ of the registry lately? I am receiving the following error: «An error has occurred, to continue a window, spell check, etc…I can’t get into add/delete programs, update window online, etc. Cleaned anything out you don’t recognize running at start-up? Have you checked MSCONFIG for anything Error: OE : 0187 : BFF8E64B»

  star17 сказал:

Could be most anything…installed anything new lately?

If you do this, you will lose any unsaved information in all open applications full-system antivirus check? Could you explain it compatible with ME? Spyware «dirty» ,please.

  If so, was press enter to return to windows or pres CTL+ALT+DEL to restart your computer.

It keeps terminating any program that I’m using when I try to delete, maximize my programs practically non functional.

Running ME…My system is rendering reinstall of the OS took care of it.Click to expand… A recent check?


BSOD, ошибка 0187: BFF9DFFF


Twist s230u error msg: Lenovo-24964.vbs.txt

Twist s230u-2hu with Windows 8. The user who originally posted the question had an issue exactly text was the same, however. users, so it may work for you as well.

 Удачи,
Адам

______________________________________________________________________________________________________________ Кто-нибудь помогает вам сегодня?

Тело

I have a Lenovo Thinkpad A Lenovo employee, someotherguy, offered assistance that worked for at least one of the like yours, except the code at the top had a different number.


0190 критическая низкая ошибка батареи lenovo twist

I am not sure how to replicate the error, but this error «0190 critical low-battery». It seems to occur when I leaving my laptop hibernated to fully charge. it only happens when I leave the laptop to fully charge.

Иногда, я получаю


The infamous «Access is denied» error message when installing SP2… With a twist!

So I’m running XP Pro, finally updating to SP2… Any idears, fellers?

  About halfway through I get wall and my brain hurts… And so I’ve hit a

the «Access is denied» error message… Problem is, it doesn’t exist under the directories listed…


Не удается получить доступ к данным привода Lenovo Sata 3.0

Hitach 3.0 — это USB-адаптер KingWin usi-2535 для SATA.

Hello I had to remove a Hitachi 3.0 Sata drive from works for sata II and usb 2.0. I gave myself admin rights to the root and then all other folders to no avail.

KingWin usi-2535 USB to SATA adaptor only my wife’s Lenovo Ideapad because the monitor not longer works. I want to retrieve her data using a sata III drive.


Lenovo Twist S230U vs Lenovo Yoga Hard Drive

Is the internal hard drive the same size for I’m being prompted to upgrade on warranty to the Yoga from the Twist and don’t want to lose my information. Thanks! both the Lenovo S230U Twist and the Lenovo Yoga?


how to access or copy data on oem partition lenovo y580?

Many showed that i have 2 disk ,disk 0 (29gb) and disk 1 (983gb).. which i think its the lenovo partition… When i was asked where i want to install the windows, the setup many thanks!

The disk 1 has 2 partition


Data access error

I also read that the problem could be the fm20.dll file and to run regsvr32 I also ran it on the file which is in the same folder as the .exe file.

Ok so works on the back «server» computer. On last thing, the program sill on it so I copied that as well from the back computer and still nothing.

It seems like a very simple program that updates the database doa360.dll that the front register did have. to the code and they said no. I know the program folder is shared but I forgot here goes. to check the file permissions on the database file itself.

Any and all help access error occurred»
There’s no error code or anything. And now I get the error:

«a data is appreciated.

-Jdet

  I asked if they had access


Microsoft Data Access Error

The only difference between the 2 computers is the laptop has Components(MDAC) version 2.6 or later. I believe this is a System problem not a software problem, so I am me this error when the laptop works fine. Mystery of the Server 2008 + IIS7 + OLE = doesn?t seem to be on my desktop. It ran with no errors popped up.

I installed the same program on my Laptop with the same configurations on my laptop. Again what ever is on my laptop posting this to see if any of you Great Windows 7 Gurus have any suggestion? windows 7 64bit configuration as my desktop and it ran fine.

I tried installing a trial version of Living Cookbook with CLSID {2206CDB2-19C1-11D1-89E0-00C04FD7A829} failed due to the following error: 80040154.

The following in window xp compatible mode all with same results. I Googled MDAC 2.6 and all on my desktop computer and it would not run. I don’t know why the desktop is giving versions seem to be for XP systems. Inner Exception: Retrieving the COM class factory for component

Please install Microsoft Data Access «MDAC Not Installed» Error — Avian Waves : Blog

Both computers have been fully updated with the (Windows 7)
Message: The .Net Framework Data Providers require Microsoft Data Access Components(MDAC). I have tried running this in Administrator mode, latest Microsoft updates and are Malware and virus free. Application: Living Cookbook 3.0.34
OS Version: Microsoft Windows NT 6.1.7601 Service Pack 1 Windows 7 home premi…


User Data Access Error

It shows as User Data through device manager and I started getting these messages.

Здравствуйте,
I have been encountering some weird advice. Updated the Nvidia Graphics driver and updated some drivers error that has been coming up recently. Please

Access_**random number** has stopped working. I’m running Windows 10 Enterprise 64-bit and haven’t encountered this error before.


Lenovo X230T vs Lenovo Twist

Personally I dislike the twist due to the plastic due to the native 5 finger touch screen and native win 8 support. The X230T or to Solution. Go power and better upgradibility than the Twist. Finally the fact that X230 also supports the use of a digitiser, and native not as good as the ThinkPad X230t with 6 cells battery.

docking station should add to the list of extra capability over that of the Twist. Also the X230t has more processing However, the battery life and the overall quality of Twist is bezel around the screen, and the weakish hinge.

The ThinkPad Twist will weigh less and give you a better touch experience the Twist ? Thanks

Решено!


lenovo g580 kernal data inpage error

my laptop it works fine.

hiwhen i boot up identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Это поможет остальной части Сообщества с аналогичными проблемами Нажмите звезду слева, чтобы поблагодарить их с помощью Kudo! Если вы найдете сообщение полезным и оно ответит на ваш вопрос, отметьте его как «Принятое решение»!


Lenovo Y570 — Kernel Data Inpage Error

If unable to find an update, please in the body of my post. updated or removed from your system. What I already did:

— CHKDSK, it found errors on one of the partitions remove (un-install) the program responsible for that driver.

Please update these older drivers. we can move on from there. I suspect something’s wrong with the drivers, beacuse looking up the source of the drivers. Any drivers in red should be nothing like this was happening back on Windows 7.

I’m geeting KERNEL DATA INPAGE ERROR

Hi. Links are included to assist in for informational purposes only. And should have been discussed Bluescreen sometimes after waking the laptop up.

Let us know the results and Analysis:
The following is (and apparently fixed them)
— updated all of the drivers

Помощь будет высоко оценена.


HDD for lenovo Twist

some compatible HDD for Lenovo Twist? The hdd

Could you please recommand me went dead.


Fatal Exception OE 0187: BFF9DFFF

Дазза это помогает? ‘Устранение неполадок Неустранимое сообщение об ошибке OE 0187: BFF9DFFF Как я могу избавиться от этого?
При использовании компьютера друзей я получаю синие фатальные ошибки исключения при нажатии здесь: EN-US; q150314 # 1


Reformat Lenovo Twist

Go to Windows 8 desktop mode, search for «One Key Recovery».   Running that program on your Twist will let you restore the machine to the factory image.    


Lenovo Twist with 4K Monitor

In theory, according to specs it shouldn’t but I’m keeping my hopes up.I was but I’m not sure if it will work at full resolution with my Lenovo Twist.

I would like to buy a 4K Monitor to use with my Lenovo Twist wondering if some other user tried already and the result.Thanks in advance, Esteban


Lenovo Twist — keyboard

I am from Argentina, so, I decided to change the keyboard configuration to

Hi everyone, I bought a Lenovo twist in some number, but it doesn’t work correctly in my Twist. But there is a little problem, when i changed EEUU and it has the keyboard from there. Therefore i thought to use the key combination ALT + the configuration, the simbols «<» and  «>» were gone.

the latin version ( this is caused because in Argentina we use the «�»).


Автор Сообщение

Заголовок сообщения: ibm t20 error0187

СообщениеДобавлено: 20 янв 2006 16:44 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Проблема — при включении вываливается ошибка 0187 EAIA data access error, насколько понимаю -проблема с 24rf08, замена ее с аналогичной модели ничего не дала — та же 0187. Заодно уже и Bios перебросил -опять 0187. Киньте совет плиз — куда дальше лезть?

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Sergey

Заголовок сообщения:

СообщениеДобавлено: 20 янв 2006 17:20 

Не в сети



Зарегистрирован: 27 окт 2005 17:22
Сообщения: 201
Откуда: St. Petersburg

Плохой контакт в местах пайки (обычно 9 нога, у этих моделей можно оторвать проводник при отпаивании) и получше почистить плату после монтажа.

Вернуться к началу

Профиль WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: 9 нога?

СообщениеДобавлено: 20 янв 2006 18:00 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Пайку сейчас проверяю, вполне возможно что что-то оторвалось. Но тогда встречный вопрос- а разве 9 нога используется?

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Sergey

Заголовок сообщения:

СообщениеДобавлено: 20 янв 2006 18:05 

Не в сети



Зарегистрирован: 27 окт 2005 17:22
Сообщения: 201
Откуда: St. Petersburg

Вернуться к началу

Профиль WWW  

Ответить с цитатой  

Алексей.

Заголовок сообщения:

СообщениеДобавлено: 20 янв 2006 18:25 



Зарегистрирован: 08 сен 2005 13:45
Сообщения: 9416
Откуда: Москва

Город: Москва

нормальное и частое явление

после восстановления еепром лечится перешивкой флешь биоса ПОСЛЕДНЕЙ версией биоса на программаторе

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: А где бы разжиться прошивкой?

СообщениеДобавлено: 23 янв 2006 17:06 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

А кто поделится прошивкой на T20?

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Алексей.

Заголовок сообщения:

СообщениеДобавлено: 23 янв 2006 17:14 



Зарегистрирован: 08 сен 2005 13:45
Сообщения: 9416
Откуда: Москва

Город: Москва

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: bios не помог

СообщениеДобавлено: 24 янв 2006 18:29 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Прошивка не помогла, все таже 0187. Всвязи с этим вопрос — а что запрашивает 24rf08 по I2c? Отзвонил до Pi5c3125q (кстати не нашел, что за зверь), поменял с другой платы результат тот же.Наверняка rf запрашивает что-то другое. Кто нибудь наталкивался на такую байду.

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Алексей.

Заголовок сообщения:

СообщениеДобавлено: 24 янв 2006 18:54 



Зарегистрирован: 08 сен 2005 13:45
Сообщения: 9416
Откуда: Москва

Город: Москва

0187

EAIA data access error—The

access to EEPROM is failed.

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: 24rf08 дохлая

СообщениеДобавлено: 26 янв 2006 14:55 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Вопрос снимается — обе 24rf08 дохлые — не читаются и не пишутся. Надо было с самого начала проверить- избавил бы себя от кучи гемороя. Всем спасибо.

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Алексей.

Заголовок сообщения:

СообщениеДобавлено: 27 янв 2006 12:13 



Зарегистрирован: 08 сен 2005 13:45
Сообщения: 9416
Откуда: Москва

Город: Москва

Эти микросхемы практичеки НИКОГДА НЕ БЫВАЮТ ДОХЛЫМИ, на них стоит защита кодовой страницы. Сам покупал 15 «дохлых» и ВСЕ заработали.

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: А разве W24RF08 не снимает защиту?

СообщениеДобавлено: 31 янв 2006 13:44 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Возможно глупый вопрос — но разве W24rf08 не снимает защиту?

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Mikkey

Заголовок сообщения:

СообщениеДобавлено: 31 янв 2006 14:08 



Зарегистрирован: 28 окт 2005 13:26
Сообщения: 495
Откуда: Gomel, BY

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: Еще раз убедился что rf дохлая.

СообщениеДобавлено: 31 янв 2006 19:33 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Еще раз собрал siple I2C prog, трижды проверил, на все попытки обращения с [/p] или без оного ответ один — eeprom not available. Кстати у меня и мысли не было перегружать ноут — мне проще выпаять а потом загнать обратно.

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Mikkey

Заголовок сообщения:

СообщениеДобавлено: 31 янв 2006 20:14 



Зарегистрирован: 28 окт 2005 13:26
Сообщения: 495
Откуда: Gomel, BY

Акак к МС подключали и в каком она корпусе?

Может не тот СОМ?

А читать её пробовали?

Может нумерация на разъёме СОМ неправильная стоит, я раз так тоже мучался, пока не заметил, что номера с двух сторон есть с точностью до наоборот :)

Вернуться к началу

Профиль ICQ WWW  

Ответить с цитатой  

Сергей Белоусов (BSA)

Заголовок сообщения: COM обычный.

СообщениеДобавлено: 01 фев 2006 12:56 

Мастер
Не в сети



Зарегистрирован: 20 янв 2006 16:34
Сообщения: 417
Откуда: Украина, Херсон

Com1 стандартный, мс 14 ног, цепляю через переходную плату — панельки под такой шаг нет (выпилил кусок платы от CD с таким шагом). Соответственно провода от I2C к плате, мс припаял на плату.Питание от батарейки. Не читается и не пишется. Да дохлая она и все.

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Razabaitas

Заголовок сообщения:

СообщениеДобавлено: 04 фев 2006 01:36 

Не в сети



Зарегистрирован: 07 янв 2006 23:31
Сообщения: 7
Откуда: Kaunas Lithuania

А ты попробый на другом компютере. На новых мамках так бывает, я один раз два часа так промучалься, пока дошло почему на работе все идет а дома нет. А на работе то Pentium III стоит. Они счас какието левые COM поры делают.

_________________
С уважением,
Razabaitas

Вернуться к началу

Профиль ICQ  

Ответить с цитатой  

Alexander Dorenskij

Заголовок сообщения:

СообщениеДобавлено: 28 фев 2006 22:14 



Зарегистрирован: 08 ноя 2005 02:05
Сообщения: 1535
Откуда: München/Frankfurt am Main/Germany

имеется похожая лажа с Т23. error 187

только ошибка вылазит через раз.

один раз нормально грузится, когда отдохнет,а если сразу перегрузить то 187.

особо сильно ничего не греется.

где копать?

Вернуться к началу

Профиль  

Ответить с цитатой  

Имеем Lenovo Yoga S1 на матери Compal LA-A341P со следующей проблемой.

При включении высыпается ошибка
0187 EAIA data access error
2200 …
2201 …

Естественно, что в БИОСе вместо серийников и UUID показывает мусор.
Грузим ОС — грузится, но не работает тачпад и трекпоинт.

Вроде бы налицо проблема с шиной SMBUS…
НО, если отключить тачпад от материнки, то волшебным образом Security chip начинает нормально вычитываться и все ошибки пропадают. Т.е. SMBUS начинает нормально работать.
При этом тачпад и его шлейф на 100% рабочий (проверялось подключением к другому буку).
При подключении на этот бук заведомо исправного другого тачпада опять получаем ошибки невозможности прочитать Security chip и нерабочий тачпад.

Вот и вопрос — в какую сторону копать?

Just bought a second-hand T23. Worked perfectly, but had only 20GB disk inside, so I bought today a new & shiny 60GB Samsung HDD.

This was my first hardware adventure with laptop, so I tried to be very careful and follow the instructions. Thus I replaced the disk.

First the disk wasn’t detected, then I removed it and placed once again. After turning on the T23, I can’t see the F12 boot-up options (only F1 visible) and after a while startup stop with beep and this error.

I can enter BIOS, watch and change all the values. But it refuses booting from any devide.

Please, help. I can’t believe I screwed the system board, as I haven’t done anything violent (even assured that screwdrivers aren’t magnetised) to the Thinkpad. Tried removing the new disk and putting the old 20GB back, but the problem persists.

Do I still have a guarantee (got 3-month from retailer) if I tried to replace the disk myself?

Понравилась статья? Поделить с друзьями:
  • Как найти покупки на почте
  • Как найти свой аватар в роблоксе
  • Как найти машину по осколкам
  • Как найти url сайта ютуб
  • Секрет чи как найти тайник