Recovery pending sql как исправить

SQL Server Database States

A SQL database is considered to be damaged if one or more of its core files are in an inconsistent state. Depending on how severe the damage is, the db is marked with different states. Some of these states are:

• Online – If one of the data files is damaged when executing a query or some other operation, the database will remain online and accessible.
• Suspect – If a database cannot be recovered during startup of SQL Server, the database is marked as Suspect.
• Recovery Pending – If the SQL Server knows that database recovery needs to be run but something is preventing it from starting, the Server marks the db in ‘Recovery Pending’ state. This is different from the SUSPECT state because it cannot be said that recovery is going to fail – it just hasn’t started yet.

Let’s first understand how you can check the current state of the database.  

How to Check Database State?

 To check the current state of an SQL db, run the following query:

SELECT name, state_desc from sys.databases 
GO

Executing the query will give you an output that looks something like:

Reasons behind Recovery Pending State in SQL Server

Some of the reasons causing such an issue are:

• The database didn’t shut down properly and there is at least one uncommitted transaction active during the shutdown, resulting in deletion of the active transaction log file.
• User tried moving the log files to a new drive to overcome server performance issues but ended up corrupting the log files in the process.
• Database Recovery cannot be initiated due to insufficient memory space or disk storage.

Methods to Fix Recovery Pending in SQL Server Database Issue

Note: Before initiating any of the following repair procedures, make sure to take db backup, so as to have a fail-safe copy in case anything goes wrong.

Method 1 – Manual Ways to Resolve the Database in Pending State

Following are the two manual ways that helps bring SQL database in recovery mode to normal mode:

1. Mark Database in Emergency Mode and Initiate Forceful Repair

Database EMERGENCY mode marks the database as READ_ONLY, disables logging, and grants access only to system administrators. Essentially, setting the db in this mode can bring the inaccessible database online. 

Note: Usually a database comes out of EMERGENCY mode automatically. If you are having issues restoring the db from this mode, read this Recover SQL Database from Emergency Mode to Normal Mode.

Once you have opened the db in EMERGENCY mode, try repairing the database using the DBCC CHECKDB command with the ‘REPAIR_ALLOW_DATA_LOSS’ option. To do so, open SSMS and execute the following set of queries:

ALTER DATABASE [DBName] SET EMERGENCY;
GO
ALTER DATABASE [DBName] set single_user
GO
DBCC CHECKDB ([DBName], REPAIR_ALLOW_DATA_LOSS) WITH ALL_ERRORMSGS;
GO
ALTER DATABASE [DBName] set multi_user
GO

2. Mark Database in Emergency Mode, Detach the Main Database and Re-attach It

This solution also requires to mark db in EMERGENCY mode. Once done, take the database offline (detach) and then bring it online (re-attach). To do so, execute the following set of queries in SSMS:

ALTER DATABASE [DBName] SET EMERGENCY;
ALTER DATABASE [DBName] set multi_user
EXEC sp_detach_db ‘[DBName]’
EXEC sp_attach_single_file_db @DBName = ‘[DBName]’, @physname = N'[mdf path]’

The above set of queries help make the server get rid of the corrupt log and build a new one automatically.

Method 2 – Use Stellar Repair for MS SQL Software

If the above methods cannot help resolve the db in recovery pending state issue, use Stellar Repair for MS SQL software. The software can help you repair corrupt database files and bring the database back online from recovery pending state quickly and smoothly.

Steps to Use Stellar Repair for MS SQL Software

• Download, install and Run Stellar Repair for MS SQL software.
• From Select Database window, click Browse or Search to select the database file you want to repair. 

• Software provides Standard Scan and Advanced Scan option to scan the corrupt database.

• Click Repair to start the repair process.
• The software shows preview of all the recoverable db components.

• To save the repaired file and its components, click Save on File menu. 

• From the Save Database window, do the following:

1. Choose MDF under Save As.
2. Select New Database or Live Database under Saving Option.
3. Enter the required details in the Connect to Server section by Authentication or SQL Server Authentication.

• Click Browse to choose the destination for saving the repaired file.

• Click Save.
• When the ‘Save Complete’ message box appears, click OK.

The repaired file will get saved in the selected location.

Note: For detailed information about using Stellar Repair for MS SQL software, refer to this user guide.

Key Features of Stellar Repair for MS SQL

• Repairs corrupt and inaccessible MS SQL Database (.mdf and .ndf) files.
• Recovers all database components like tables, keys, indexes, triggers, rules, and stored procedures, etc.
• Recovers deleted records.
• Supports MS SQL 2019, 2017, 2016, 2014, 2012, 2008, 2008 R2 and all lower versions.
• The software is trusted by Microsoft MVPs.

Conclusion

This post outlined reasons behind ‘db in recovery pending state’ issue like database is not cleanly shut down, database files (.mdf or .ndf) turned corrupt, insufficient memory or disk space. It also described methods to fix Recovery Pending State in SQL Server Database.

You can fix the database by setting it to emergency state, and initiating the repair process or de-attaching and reattaching the db. But, such solutions have their own downsides:

• It can only resolve minor database issues.
• It does not ensure complete recovery of the database.
• It involves data loss risk, particularly, running ‘REPAIR_ALLOW_DATA_LOSS’ command can delete some data.

You can overcome these limitations by using Stellar Repair for MS SQL software. The software helps SQL users and database administrators (DBAs) to fix severe database corruption errors. Also, it ensures complete recovery of db components, while preserving data integrity.

Люди, которые использовали SQL-сервер, возможно, однажды столкнулись с ошибкой SQL база данных в состояние ожидания восстановления из-за ее повторного появления. Если вы не знаете, почему происходит эта ошибка, значит, ваш раздел базы данных, вероятно, заполнен. SQL не может открыть базу данных и не может заблокировать файл базы данных, который очень похож на базу данных в автономном режиме. Это больше похоже на то, что что-то мешает запуску сервера. В этом блоге мы собираемся обсудить, как исправить состояние ожидания восстановления SQL Server с помощью наилучших возможных методов. Прежде чем продолжить, давайте узнаем, каковы причины этой ошибки.

Причины – Состояние Ожидания восстановления базы данных SQL Server

• Раздел базы данных переполнен или
  недостаточно памяти
• Аппаратный сбой
• Повреждение в лог-файлах
• Из-за какой-либо незавершенной задачи
  или при закрытии были некоторые действия,
  ожидающие со стороны пользователя
• Повреждение или повреждение в файлах
  MDF
• Запуск сервера без промежутков времени

Читайте также: Восстановление поврежденного файла MDF

Мгновенное Решение: Используйте средство восстановления SQL SysTools, чтобы исправить состояние ожидания восстановления в базе данных SQL Server. Это программное обеспечение может быстро устранить все ошибки, связанные с базой данных SQL. После восстановления он предоставляет возможность экспортировать данные в базу данных SQL или сценарии SQL.

Скачать SQL восстановление Покупка Сейчас

Ручные
способы исправить Состояние ожидания
восстановления SQL Server

Как всегда можно увидеть или испытать,
что ручные способы довольно сложны и
опасны в использовании. Поэтому, прежде
чем запустить его, убедитесь, что у вас
есть резервная копия базы данных. Если
вы новичок в этом, то рекомендуется,
чтобы вы выполняли его под руководством
технического специалиста или не выполняли
его.

Способ 1

В этом ручном методе для разрешения
Состояние ожидания восстановления базы
данных SQL Server необходимо запустить
принудительное восстановление.

1. Запустите нижеуказанные SQL-запросы.

ALTER DATABASE (Database Name) SET EMERGENCY;

GO

ALTER DATABASE (Database Name) set single_user

GO

DBCC CHECKDB ([Database Name], REPAIR_ALLOW_DATA_LOSS) WITH
ALL_ERRORMSGS;

GO

ALTER DATABASE (Database Name) set multi_user

GO

2. База данных помечена как READ_ONLY в
аварийном режиме, отключает ведение
журнала и предоставляет доступ только
системным администраторам.

3. После того, как эти шаги будут выполнены,
повреждение файла будет исправлено, и
база данных снова будет подключена
автоматически.

Способ 2

В этом втором методе, который может
разрешить состояние ожидания восстановления
в базе данных SQL Server, нам нужно сначала
поработать в аварийном режиме, давайте
посмотрим, как.

1. Выполните следующие команды:

ALTER DATABASE (Database Name) SET EMERGENCY;

ALTER DATABASE (Database Name) set multi_user

EXEC sp_detach_ db ‘(Database Name)’

EXEC sp_attach_single_file_db @Database Name = ‘(Database Name)’,
@physname = N’(mdf path)’

2. Система автоматически удалять
поврежденные журналы и создаст новый.

Если вы успешно выполнили оба метода,
то до сих пор проблема Состояние ожидания
восстановления базы данных SQL Server может
быть решена. Если нет, то рекомендуется
перейти на более безопасный и лучший
подход, который является автоматизированным
методом.

Автоматизированное
решение для исправления Состояние
Ожидания восстановления SQL Server

Автоматизация гораздо лучше, чем тратить много времени и усилий на ручные методы. Для автоматического метода вы можете перейти к Восстановление базы данных SQL. Это программное обеспечение помогает восстановить поврежденный файл MDF со всеми объектами базы данных. Для выполнения процесса восстановления базы данных SQL не требуется резервное копирование. Можно легко восстановить базу данных SQL без резервного копирования. Давайте узнаем, как это работает для восстановления поврежденных файлов базы данных SQL и устранения состояние ожидания восстановления в базе данных SQL Server.

1. Установите и запустите программу восстановления SQL, затем нажмите кнопку «Открыть», чтобы загрузить файл базы данных.

2. Выберите режим быстрого или расширенного сканирования, а затем установите флажок Автоопределение версии файла SQL Server.

3. Теперь начнется процесс сканирования. После сканирования вы можете увидеть предварительный просмотр восстановленных предметов.

4. Выберите опцию «Экспорт» сверху и выберите «Экспорт данных в базу данных SQL или сценарии SQL».

5. Заполните все необходимые данные ниже и выберите экспорт только со схемой или только со схемой и данными.

6. В конце нажмите кнопку «Экспорт», чтобы восстановить файлы базы данных SQL.

Вывод

Как мы уже обсуждали в блоге, насколько важна для нас база данных SQL и насколько она склонна к состояние ожидания восстановления SQL Server , вы должны знать эти методы для спасения. Но как мы видим, насколько сложен ручной метод, поэтому всегда рекомендуется переходить на автоматизированный метод. Это лучший инструмент SQL для восстановления поврежденной базы данных SQL и устранения проблемы SQL база данных в состояние ожидания восстановления.

In everyday use, the SQL server database may face many technical issues and are tough to settle. One of the problems is «Recovering pending state in SQL server database». If you encounter this issue unexpectedly, don’t worry. Resort to the fixes here to solve recovery pending state in SQL server database. Besides, if you are not a professional in SQL server database issues and do not have the confidence to settle this problem, you can use EaseUS MS SQL Recovery to help you do it in a simple and effective way.

Three States of SQL Server Databases

If a single or multiple core MDF/NDF files corrupted, an SQL database is likely to be damaged. Different levels of damage will show up in different states. Let’s look into the details.

• Online: If one of the data files has been damaged, the database will remain accessible and online.
• Suspect: The transaction log file is damaged and it inhibits recovery or prevents transaction rollback from completion, which will result in failure of SQL database.
• Recovery Pending: The SQL Server needs to run database recovery, but is prevented from starting due to some causes. This is unlike a Suspect state that shows recovery may fail, but it has not started yet. 

Reasons for Recovery Pending State in SQL Server

Several factors can lead to recovery pending state in SQL Server database. The main reasons are listed as follows.

• The database is not cleanly shut down. In other words, one or more unaccomplished transaction is active at that time and its log file has been deleted.
• The transaction log files are corrupted during the process of transfer to solve performance issues.
• Insufficient free storage space on the database partition, which causes SQL can’t open the database and can’t lock the database files.

How to Fix Recovery Pending State in SQL Server Database

You can fix the recovery pending state issue in the SQL Server database manually with some queries. Or to avoid worse problems due to misoperations, you can use a professional MS SQL recovery tool to take you through.

Method 1. Mark SQL Database in Emergency Mode

The emergency mode will mark the SQL database as READ_ONLY, disable logging. At this time, DBA is only allowed to access. Entering emergency mode and start database recovery can solve any technical issue. And the database will automatically come out of the EMERGENCY mode.

ALTER DATABASE [DBName] SET EMERGENCY;

GO

ALTER DATABASE [DBName] set single_user

GO

DBCC CHECKDB ([DBName], REPAIR_ALLOW_DATA_LOSS) WITH ALL_ERRORMSGS;

GO

ALTER DATABASE [DBName] set multi_user

GO

Method 2. Mark SQL Database in Emergency Mode, Disconnect the Main Database

These queries will cause the server to get rid of the corrupt log and build a new one automatically. 

ALTER DATABASE [DBName] SET EMERGENCY;

ALTER DATABASE [DBName] set multi_user

EXEC sp_detach_db ‘[DBName]’

EXEC sp_attach_single_file_db @DBName = ‘[DBName]’, @physname = N'[mdf path]’

An Easier and Risk-Free Way to Fix Recovery Pending State in SQL Server

The above manual solutions can fix recovery pending state issues effectively. If you are a pro at SQL Server database issues, they are your first choices. However, if you don’t know much about SQL Server databases, we highly recommend you try a safer and automated workaround. Use MS SQL recovery software to repair the corrupted database in 823/824/825 errors.

Step 1. Download and run EaseUS MS SQL Recovery.

Step 2. Click the two dots (Browse button) to choose the target MDF file or click «Search» and select the desired file to repair from the list found below. Then, click «Repair» to start the repairing process. 

Step 3. When the process completes, a Window will appear to confirm the successful analysis. All the deleted tables & records recovered items will be listed on the left pane in the name of the original tables.

Step 4. Click the «Export» button in the bottom right corner of the screen. You can save the recovered database to database & SQL scripts based on your need. Then, you need to enter Server/Instance Name and connect to the server. If you choose to «Export to database», you can create a new database or export to an existing database. 

Free Manual Ways to Fix SQL Server Recovery Pending State

SQL Server database faces many technical issues that hinder the data. One such issue is the “SQL Database in Recovery Pending State”. If you don’t know why this error occurs and how to fix it, this blog is all about your needs. Here we will cover the possible reasons behind the SQL recovery pending mode and the best possible solutions to fix SQL Server recovery pending state. First, let us know the complete information about SQL database states to clarify today’s topic.

Table of Content

• SQL Server Database States
• Solve Recovery Pending in 5 Steps
• SQL Recovery Pending Causes
• Manual Method to Fix Issues
• Improved Method to Solve Problem
• Why SQL Database Recovery Software?
• Prevent Recovery Pending SQL Server?
• The Final Words
• FAQs
• Trusted User Reviews

SQL Server Database States

If single or multiple core files cannot be accessed in SQL Server, it means that the SQL Server database is corrupted. According to the degree of damage in the database, there are different states of SQL Server Database that indicate different issues. Some of the states are listed below. Therefore, users can get help in understanding recovery pending SQL server state in depth.

• Online: If a single file is damaged or corrupted and cannot be accessed, the database remains available and online.
• Suspect: If the transaction log file is damaged and the recovery is prevented or the transaction is prevented from being rolled back, the SQL database will fail.
• Recovery Pending: When the SQL server knows that the database needs to be restored but there is an obstacle before starting. This status differs from the suspect mode because it cannot be declared that the database restore has failed but the process has not yet started.

Know the Reasons for Recovery Pending SQL Server State

Before moving to the solution, you need to know the reasons behind the SQL database in recovery pending state. Some of the main reasons are explained below:

• The database is not shutting down properly, which means that at least one uncommitted transaction is active at the time the database is shutdown, and the log file for it has been deleted.
• Due to insufficient space or hard disk space, the SQL database recovery cannot be started.
• If the primary database files are corrupted then the user may also face this problem
• The user tried to move the log files to a new drive to resolve server performance issues. But, the log files were damaged.

Manual Method to Fix SQL Server Database Recovery Pending State

There are two manual solutions that can help you to resolve SQL recovery pending status. Follow the below-listed steps carefully to avoid data loss:

Method 1: Mark SQL Database in Emergency Mode and Start Forcefully Repair

• Execute the following queries to fix SQL Server Recovery Pending state using DBCC CHECKDB:

ALTER DATABASE [DBName] SET EMERGENCY;
GO
ALTER DATABASE [DBName] set single_user
GO
DBCC CHECKDB ([DBName], REPAIR_ALLOW_DATA_LOSS) WITH ALL_ERRORMSGS;
GO
ALTER DATABASE [DBName] set multi_user
GO

• EMERGENCY mode marks the SQL database as READ_ONLY, deactivates logging and grants authorization only to the system administrator.
• This method is able to fix the technical problems and restore the database to an accessible state. The database automatically exits the EMERGENCY STOP mode.

Method 2: Mark SQL database in Emergency Mode, Disconnect the main Database and re-attach it

• Execute these queries to fix SQL database in recovery pending state without DBCC CHECKDB:

ALTER DATABASE [DBName] SET EMERGENCY;
ALTER DATABASE [DBName] set multi_user
EXEC sp_detach_db ‘[DBName]’
EXEC sp_attach_single_file_db @DBName = ‘[DBName]’, @physname = N'[mdf path]’

These commands will help the server retrieve a corruption-free log and automatically create a new one.

Fix SQL Server Recovery Pending State – Modern Method

To deal with all SQL Database errors professionally and repair corrupt SQL database MDF file effortlessly, use the SysTools SQL Database Recovery software. This tool will allow the user to repair and restore SQL database with all objects. It enables you to recover deleted database objects & records from the SQL table and displays a preview in red color.

The tool also allows its users to export the recovered data to SQL Server on the same machine or a network for recovery pending SQL server DB. By using it, you can save the database as .sql script or CSV file at your desired location. More so, the tool support database files (.mdf/.ndf) created in any version of MS SQL Server. The software gives a 100% accurate solution in just a few simple steps.

Step-1. Download tool and launch it on your system to begin fixing SQL server database recovery pending state.

Download Now Purchase Now

Step-2. Click the Open button and select a corrupt or damaged .mdf file.

Step-3. Select the Quick or Advance Scan option and also check the Auto-detect SQL version.

Step-4. Once the data recovered, the software displays a quick preview of all database items stored in the .mdf file.

Step-5. Now, select the SQL Server Database option to export data to the live SQL Database and enter login credentials.

Step-6. Restore SQL Database to a new database or an existing database as per your needs.

Step-7. Select the With only schema and With schema and data option, after that click the Export button to start the restoring process.

Why SQL Database Recovery Software?

This is an expert-recommended tool to recover corrupt SQL database MDF and NDF files. Once the data is recovered, it gives an option to restore complete or selective data directly to the live SQL Server database. It provides multiple features to fix recovery pending SQL server state and some of them are:

• Easy-to-use interface.
• 100% virus-free.
• Fix all SQL Database errors.
• Able to recover SQL database without backup.
• Auto-fetch server name while exporting to SQL Server.
• Recover and restore deleted table records.
• Supports all SQL versions including latest 2019 version.

Also Read: How to Fix SQL Server Page-Level Corruption?

How to Prevent Recovery Pending SQL Server State?

Get Decent Power Backup – Do not let the power shut down causing the SQL server to collapse. Therefore, always be ready with a power backup to avoid such situations. It is not the solution for all the causes but it does avoid data file corruption whenever the database connection gets interrupted in between a  running query. To avoid this problem from its very root, simply make arrangements for dual power sources.

24×7 SQL Server Monitoring – Users must monitor their SQL server constantly. If not possible, at least frequent checks must be taken into account for sure. Always take care of the issues like low space in the disk or memory maximization. His way, both the physical environment gets protected as well as the recovery state can be prevented.

Frequent Data Backups – Make sure that you back up your database on a frequent basis. To ease the work, decide a particular time in a day or week that is only dedicated for backup, monitoring, etc maintenance tasks. Also, do test your database for disasters to know how prepared your SQL Server is to handle unwanted sudden issues. It keeps users one step ahead at all times.

Final Words

In this blog, we have provided a quick guide on how to deal with SQL Database in Recovery Pending State. Here we explained the step-by-step solution to fix SQL Server recovery pending state with DBCC CHECKDB or without DBCC CHECKDB commands. In addition, such tools can solve other issues as well like resolving SQL server error 26 & much more. We also shared a better approach to fix all SQL database errors and recover corrupt SQL database files within a minimum possible time.

FAQs

Q-1. Why does SQL Server States Recovery Pending?

Ans: Whenever the required backup is blocked due to some reason, the SQL Server shows this message. This can happen when the database awaits for the backup or the lock in the target database gets disabled.

Q-2. What’s the major reason SQL Server goes into recovery mode?

Ans: There are three primary reasons for the SQL Server to go into recovery mode. These reasons are:

• Corruption in the SQL MDF or LDF data files.
• Ongoing transactions in between the server crash.
• LDF file reaching the maximum configuration limit.

Q-3. Is the automated method good for Recovery Pending SQL Server?

Ans: Yes, the automated method is the best option for users to get rid of all the errors as well as the technicalities. It works smoothly & performs the task much faster.

Q-4. What is the reason for suspect mode?

Ans: Whenever the primary file group catches any issue in it, the database shows the suspect mode. In this case, users can not use the SSMS to resolve the issue.

Trusted User Reviews

It’s been a year that I’m using this automated solution to get rid of recovery pending SQL server issue & I must say that it works perfectly. It does not disappoints me & can repair the damaged database objects as well. I highly recommend this utility to users with similar needs for sure.
– Thomas Hampton, U.S.A

No other solution can match the level of this smart tool for getting the SQL server out of the pending recovery state as it has advanced algorithms & AI technology. My experience with this is quite smooth & better than all other solutions that I tried before. I ain’t going to switch now. You may also try it & I’m sure you won’t regret it.
– Robert G. Spears, U.S.A

I tried this automated tool 2 years ago for the first time. Since then, no other recovery tool can take its place, WHat I liked the most about this is the easy process, accurate results, utmost security & plenty of features. Any user can rely on this one without any doubt & they will get desired results after solving SQL Server Recovery Pending State.
-Joseph Lake, U.S.A