Setup cannot continue because one or more of the required как исправить

Добрый день!

Ос win2003 r2 x64 sp2. При автоматическом обновлении не устанавливается обновление KB2518295.Ошибка в журнале

Event Type: Error
Event Source: Windows Update Agent
Event Category: Installation
Event ID: 20
Date:  22.09.2011
Time:  14:09:26
User:  N/A
Computer: DC1
Description:
Installation Failure: Windows failed to install the following update with error 0x8007f0f4: Security Update for Windows Server 2003 x64 Edition (KB2518295).

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 57 69 6e 33 32 48 52 65   Win32HRe
0008: 73 75 6c 74 3d 30 78 38   sult=0x8
0010: 30 30 37 66 30 66 34 20   007f0f4
0018: 55 70 64 61 74 65 49 44   UpdateID
0020: 3d 7b 42 31 43 43 41 34   ={B1CCA4
0028: 31 45 2d 43 42 43 35 2d   1E-CBC5-
0030: 34 35 39 32 2d 38 37 41   4592-87A
0038: 32 2d 34 44 45 31 30 30   2-4DE100
0040: 46 33 36 33 31 31 7d 20   F36311}
0048: 52 65 76 69 73 69 6f 6e   Revision
0050: 4e 75 6d 62 65 72 3d 31   Number=1
0058: 30 33 20 00               03 .   

Скачал WindowsServer2003.WindowsXP-KB2518295-x64-ENU При попатке установить ошибка

Setup cannot continue because one or more prerequisites required to install KB2518295 failed. For More details check the Log File c:windowsKB2518295.log вот лог

1.859: 2011/09/22 15:24:35.317 (local)
1.859: c:378cf4d0926f5c4d0599c400a2d234d2updateupdate.exe (version 6.3.4.1)
1.937: DoInstallation: GetProcAddress(InitializeCustomizationDLL) Returned: 0x7f
1.953: Hotfix started with following command line:
2.562: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
2.640: CreateUserInterface:  GetProcAddress for DefineInstallCustomUI failed:  0x7f
2.765: Return Value From IsWebEnrollmentRoleEnabled = 0
2.765: IsWebEnrollmentRoleEnabled returned value( 0x0 ) which is Not Equal To 0x1
2.765: Condition Check for Line 1 of PreRequisite returned FALSE
2.765: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
2.765: KB2518295 Setup encountered an error:  Setup cannot continue because one or more prerequisites required to install KB2518295 failed. For More details check the Log File c:windowsKB2518295.log
2.781: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
2.781: Setup cannot continue because one or more prerequisites required to install KB2518295 failed. For More details check the Log File c:windowsKB2518295.log
4.953: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2518295 failed. For More details check the Log File c:windowsKB2518295.log
4.953: User Input: OK
4.953: Update.exe extended error code = 0xf0f4
4.953: Update.exe return code was masked to 0x643 for MSI custom action compliance.

Подскажите как исправить?

I was using Windows 7.  I used to have a Microsoft mouse, but it died.  Sadly, the Microsoft Mouse and Keyboard Center did not die along with it.  Instead, I had to mount a determined extermination campaign.  This post relates that saga.  (I was using Windows 7 x64; not sure whether any of these details would vary on another Windows operating system.)

The original problem was that, whenever I went into Control Panel > Mouse to adjust my mouse settings, I would get a dialog telling me that the Mouse and Keyboard Center was not able to be installed because the installer was looking for files that did not exist.  The solution to this, I thought, was to go into Control Panel > Programs and Features and uninstall Microsoft Mouse and Keyboard Center.  Little did I know that this exercise would only make things worse.

It made things worse because (a) it did not actually uninstall Microsoft Mouse and Keyboard Center (MMKC), though it did remove the MMKC entry from the listed programs, and (b) this state of affairs led me to believe that I had thus inadvertently removed MMKC from the list of programs that Revo Uninstaller could detect.

I cared about Revo Uninstaller because it was often good at removing programs.  I had not really removed MMKC from the list of installed programs, as I would eventually discover; but the belief that I had done so started me on a project of trying to reinstall MMKC (or of trying to do a new installation that would overwrite the fubar parts of the existing installation), so that Revo would be able to find and remove it.  What I would eventually discover was that MMKC could be listed in Programs and Features and still not appear in the list of programs that Revo could identify.

Attempts to install the latest version of MMKC were futile, giving me an error message:

This software version is already installed on this system.  To re-install this software, you must remove it first, and then run Setup again from the installation menu.  For information about removing a program, see Windows Help.

I did see Windows Help, by going into Control Panel and hitting F1.  I searched the popup for “removing a program.”  Its only relevant advice was to try uninstalling in Safe Mode.  I rebooted and immediately began hitting F8 until I got a Safe Mode boot option.  In Safe Mode, I went to Start > search for Programs and Features > Microsoft Mouse and Keyboard Center > Uninstall.   This gave me an error:

Setup must close because an error occurred.  Verify that your computer meets the system requirements on the product packaging.

I booted back into Normal Mode.  There, I took a look at one other thing that, in fairness, I must admit I was turned on to by Windows Help, namely, the existence of a folder called C:Program FilesMicrosoft Mouse and Keyboard Center.  I wasn’t quite ready to just delete that folder wholesale — there was no telling what that would do — but I did check it, in vain, for an Uninstall program.  It did have a Setup.exe file, but running that just gave me another error:

Setup cannot continue because one or more of the required installation files are missing or damaged.  Run Setup again from the software CD-ROM or another reliable installation source.

Which would have been great advice if I had not already tried it.  The version of MMKC that I had most recently tried to install was in a downloaded file called MouseKeyboardCenter_64bit_ENG_2.2.173.exe.  Somehow I found another Microsoft webpage that offered to give me an earlier 64-bit version and a handful of 32-bit versions.  From that page, I downloaded and tried running a filed called MouseKeyboardCenter_64bit_ENG_2_0_162.exe.  This gave me a different error:  “Setup cannot continue because a later version of this software is already installed.”

I noticed that the page from which I downloaded that earlier version said that MMKC was “formerly IntelliPoint and IntelliType Pro.”  That was interesting because MartinZin had advised me to solve this MMKC problem by searching the registry (in Regedit) for every occurrence of IntelliType, and deleting them all.  That had not accomplished anything.  (Note:  I did have good Acronis image backups of the program drive, and also had good System Restore points, so I could roll things back if this went haywire.)

I wondered, now, if I could try installing not only IntelliType but also IntelliPoint, and then use Programs and Features or Revo to uninstall them and/or MMKC.  I found download pages for the 64-bit versions of IntelliType and IntelliPoint (v. 8.2) and tried installing those.  IntelliPoint would not install — it gave me the “a later version is already installed” error — but IntelliType thanked me for choosing a Microsoft keyboard (as if …) and proceeded to install.  This did not help anything — Programs and Features still gave me the “required installation files are missing” error when I tried to uninstall MMKC — but at least I was able to uninstall IntelliType.  When I did so, I got an error indicating that there was a problem with MMKC.  It went by too quickly for me to capture verbatim, but it then yielded this message:

There is a problem with the Mouse and Keyboard Center software installation.  To fix the problem, you must remove Mouse and Keyboard Center software, and then run Mouse and Keyboard Center Setup again.

So now it was clear:  I just had to figure out how to remove MMKC.  I silently thanked them for that stunning insight.  In service of that quest, a search led back to Microsoft’s Fix It Solution Center, where I had previously tried to run their FixIt tool to “fix problems that programs cannot be installed or uninstalled” (replacing Microsoft’s old Windows Installer Cleanup Utility (MSICUU2.exe)).  As I now reprised, that FixIt tool terminated in an error:

This troubleshooter is not available

This troubleshooter is invalid or might have expired.  If the file name was changed when the troubleshooter was saved, the troubleshooter is rendered invalid and cannot be run.

Contrary to that warning, I had not renamed the downloaded troubleshooting file, so the best explanation appeared to be that it was useless.  At this point, whatever the situation may have been previously, MMKC was once again appearing in Programs and Features.  My attempt to uninstall it gave me another instance of the “Setup cannot continue” error quoted above.

Lacking other ideas, I went back to MartinZin’s suggestion, this time using Regedit to search through the registry, from the top, for every instance of IntelliType and IntelliPoint.  For most keys with one of those two words in its name, I deleted the entire key and all of its subkeys.  The decision to do so was helped by the fact that these keys rarely contained more than a few lines obviously oriented toward MMKC.  Where it appeared that other programs might be affected, I deleted only the subkeys referring specifically to MMKC or these other related names.  This exercise alerted me also to the abbreviated forms Itype, Ipoint, and mskey, as well as the long-form “Microsoft Mouse and Keyboard Center.”  I also started to search for and delete keys referring to Point64, but decided not to continue that; it seemed I had best restrict my search primarily to keys that referred to files in, or were otherwise directly related to, the MMKC folder on drive C.  For Itype and Ipoint, I modified the registry search to find whole words only.  For the long form phrase, “Microsoft Mouse and Keyboard Center,” I searched for the whole phrase and several subphrases (e.g., “Microsoft Mouse,” “Mouse Keyboard”), as well as “MMKC.”  In most cases, I did the search twice, to make sure I had them all.  For the long-form phrase, a search in O&O RegEditor confirmed that there were more than 150 instances, so in that case I did not do the extra mouse work to select and delete the whole key; the keyboard work was considerably faster if I just deleted the individual values referring to MMKC, usually leaving a null default value under the key.  Altogether, this was a time-consuming process, probably chewing up well over an hour.

When that was done, I deleted C:Program FilesMicrosoft Mouse and Keyboard Center.  Then I looked for a good registry cleaner.  Many people had recommended CCleaner over the years, but it had screwed things up for me one time, due to overly aggressive settings.  On that level, I agreed with numerous articles and posts suggesting that registry cleaners were often unhelpful and sometimes damaging.  I’d had generally good results with Glarysoft Registry Repair — less so with 64-bit Windows 7, but then again, possibly I had been using an outdated version.  Reassured by a relatively positive review on About.com, I decided to try again with their latest version.  I ran it and then rebooted.

On reboot, the system was completely screwed up.  Just kidding.  What actually happened was that MMKC was no longer listed in Programs and Features.  I went into Control Panel > Mouse.  There was no longer a tab for MMKC.  I ran sfc /scannow to contribute to system stability; I probably should have done that before rebooting.

At the moment, it seemed that the extensive registry editing and/or the deletion of C:Program FilesMicrosoft Mouse and Keyboard Center had solved the problem for me.  As long as I didn’t buy or connect another Microsoft mouse or keyboard, I might be OK.  I wasn’t using that particular laptop much at that point, so I was not prepared to say that it looked like everything was good.  But at least in the next several reboots, I did not notice any ill effects from that wanton registry triage.

Go to Windows10

Microsoft has recently released Service Pack 3 (SP3) for its popular Windows XP operating system. This service pack includes the updates and patches that were released for Windows XP over the years. In this article, we are going to cover the solutions for various errors that you may receive while installing SP3 on your Windows XP computer.

Note: When any of the errors discussed below occur, you may find the following error is added to the installation log file of the service pack usually located at C:Windowssvcpack.log:

“8007F0F4 - STATUS_PREREQUISITE_FAILED”

Error Message 1: "This Service Pack requires the machine to be on AC Power before setup starts."

Cause of the Error

This error message is usually displayed on laptops if you are trying to install SP3 while running the system on batteries. The error is displayed to ask you to switch to AC power and minimize the chances of update failure if the battery power fails.

Solution

To resolve this issue, ensure that your PC is connected to AC power before you start the SP3 installation.  

Error Message 2: "Service Pack 3 Setup has been canceled because Microsoft Shared Computer Toolkit for Windows XP is not compatible with this version of Windows. Before you can continue, you must:

1) Uninstall Microsoft Shared Computer Toolkit

2) (Optional) Install Windows SteadyState, the newer version of Microsoft Shared Computer Toolkit.

For more detailed information, go to the Shared Access page on the Microsoft Web site.

Cause of the Error

“Microsoft Shared Computer Toolkit for Windows XP” is not compatible with Windows XP SP3. So, if the toolkit is already there, Windows XP SP3 installation will generate the above error.

Solution

To resolve this issue, first uninstall Microsoft Shared Computer Toolkit from your computer. To do this, you may either use the Windows Add or Remove Programs (appwiz.cpl) utility or a third-party program uninstaller tool, such as Perfect Uninstaller.

In case you want to retain the Shared Computer toolkit feature, you may download and install Windows SteadyState on the system.

Error Message 3: "Service Pack 3 Setup has been canceled because Windows XP SP3 cannot be installed over RDP 6.0 MUI PACK (Update for Windows XP (KB925877)). Before you can continue, you must Uninstall KB925877."

Cause of the Error

The error is displayed if you have Multilingual User Interface Pack (MUI) for the Remote Desktop Connection 6.0, which is installed with Windows XP KB925877 update on your XP computer.

Solution

To resolve this issue, uninstall the KB925877 update. To do this, open the Add or Remove Programs window, and then select the Show Updates checkbox. Select Update for Windows XP (KB925877), and then click the Remove button.

Error Message 4: "Microsoft Windows XP Professional Service Pack 3 cannot be applied to Windows Fundamentals for Legacy PCs (WinFLP). A unique SP3 update package for WinFLP will be made available at download.microsoft.com."

Cause of the Error

You are attempting to install on Windows Fundamentals for Legacy PCs (WinFLP), which is not supported by Windows XP SP3.

Error Message 5: "Microsoft Windows XP Professional Service Pack 3 cannot be applied to Windows Embedded for Point of Service (WEPOS). A unique SP3 update package for WEPOS will be made available at download.microsoft.com."

Cause of the Error

You are attempting to install on Embedded for Point of Service (WEPOS), which is not supported by Windows XP SP3.

Solution for Errors 4 and 5:

Download WinFLP and WEPOS compatible Windows XP SP3 and then install it on your computer.

Error Message: “Setup cannot continue because one or more prerequisites required to install Service Pack 3 failed. For More details check the Log File Drive_Letter:windowssvcpack.log."

Cause of the Error

You may encounter this error message if you are trying to install Windows XP SP3 on Windows XP Media Center Edition or over Windows XP Media Center Edition 2003.

You may not encounter this error on Windows XP Media Center Edition 2004.

Solution

To resolve this issue, you first need to install Windows XP SP2 on your Windows XP Media Center Edition or over Windows XP Media Center Edition 2003 computer. After you are done, install Windows XP SP3.

0x00000000 Success 0x00000001 ERROR_INVALID_FUNCTION 0x0000007B Error_Invalid_Name The filename, directory name,or volume label syntax is incorrect 0x00000275 Error_cant_enable_Deny_only A group marked use for deny only can not be enabled 0x0000041D ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion. 0x000004C3 Error_Session_Credential_Conflict Multiple connections to a server or shared resource by the same user,using more than one user name, are not allowed. 0x000004C5 Error_Dup_Domainename The workgroup or domain name is already in use by another computer on the network. 0x000005D5 NULL 0x00000619 error_Invalid_HW_Profile The specified hardware profile configuration is invalid 0x00000641 Error_Install_Service_failure The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. 0x00000643 ERROR_INSTALL_FAILURE Fatal error during installation 0x00000652 ERROR_INSTALL_ALREADY_RUNNING Another installation is already in progress. Complete that installation before proceeding with this install. 0x000006D9 EPT_S_Not_Registered There are no more endpoints available from the endpoint mapper. 0x000006F6 RPC_X_BYTE_Count_TOO_Small The byte count is too small 0x00000963 NERR_BADPasswordCore This share name or password is invalid 0x00000BC2 Error_Success_Reboot_Required 0x00000C0B NULL 0x00000CC4 NULL 0x00000D47 NULL 0x00000E5C NULL 0x00000E74 NULL 0x0000109F NULL 0x00001112 Error_No_Media_In_Drive No media in drive 0x0000117A NULL 0x00001190 Error_Shutdown_IS_Scheduled A system shutdown has already been scheduled 0x00001234 Error_Port_Unreachable No Service is operating at the destination network endpoint on the remote system 0x00001396 Error_Wrong_Target_Name Logon failure: The target account name is incorrect. 0x000013D7 Error_Cluster_restype_Note_Supported The specified node does not support a resource of this type. This amy be due to version inconsistancies or due to the absence of the resource DLL on this node. 0x00001449 Error_Invalid_Showwin_Command Cannot show or remove the window in the way specified 0x00001633 NULL 0x000017C7 NULL 0x000017D2 NULL 0x000018BE NULL 0x00001AD4 NULL 0x00001ADA NULL 0x00001C70 NULL 0x00001CE8 NULL 0x00001D7A NULL 0x00001F1D NULL 0x00001F59 NULL 0x00002075 NULL 0x0000229A NULL 0x000022CA NULL 0x0000230B NULL 0x00002685 NULL 0x000028A5 NULL 0x00002ABF NULL 0x00002BBE NULL 0x00002D49 NULL 0x00002DA4 NULL 0x00002DDC NULL 0x00002EBD NULL 0x00002ED7 NULL 0x000032D8 NULL 0x000035DD NULL 0x000036F8 NULL 0x000037A1 NULL 0x000037FA NULL 0x0000384E NULL 0x000038F5 NULL 0x0000399D NULL 0x00003A5C NULL 0x00003D16 NULL 0x00003E44 NULL 0x00004016 NULL 0x000040CF NULL 0x00004146 NULL 0x000041F4 NULL 0x0000433D NULL 0x000043F9 NULL 0x000044CC NULL 0x0000471E NULL 0x00004808 NULL 0x00004910 NULL 0x00004966 NULL 0x00004A65 NULL 0x00004BF9 NULL 0x00004CC2 NULL 0x00004D2D NULL 0x00004DB8 NULL 0x00004E90 NULL 0x00004FA2 NULL 0x00005112 NULL 0x000051CF NULL 0x00005249 NULL 0x00005299 NULL 0x0000530C NULL 0x000053C4 NULL 0x00005492 NULL 0x00005542 NULL 0x0000556E NULL 0x000055BC NULL 0x00005636 NULL 0x00005812 NULL 0x00005844 NULL 0x000058F7 NULL 0x00005A6A NULL 0x00005AA5 NULL 0x00005C0E NULL 0x00005FE9 NULL 0x00006056 NULL 0x0000626E NULL 0x000062B6 NULL 0x0000651F NULL 0x000065AA NULL 0x000065BA NULL 0x00006F50 NULL 0x00007052 NULL 0x00007190 NULL 0x00007617 NULL 0x00007747 NULL 0x00007865 NULL 0x00007B86 NULL 0x00007C12 NULL 0x00007C78 NULL 0x00007CE1 NULL 0x00007D12 NULL 0x00007DFF NULL 0x00007EC9 NULL 0x00007F83 NULL 0x00007FCC NULL 0x0000F06A NULL 0x0000F06B NULL 0x0000F0DA NULL 0x00240001 WU_S_SERVICE_STOP Service stopped 0x00240002 WU_S_SELFUPDATE Agent selfupdates 0x00240003 WU_S_UPDATE_ERROR Overall operation completed but error occurred while processing one or more specified updates. 0x00240004 WU_S_MARKED_FOR_DISCONNECT The caller attempted to disconnect an operation but the operation is busy calling back so the callback is marked for disconnect later 0x00240005 WU_S_REBOOT_REQUIRED The system needs to be rebooted to complete installation. 0x00240006 SUS_S_ALREADY_INSTALLED The update to be installed is already installed 0x00240007 WU_S_ALREADY_UNINSTALLED The update to be uninstalled is already not installed. 0x00240008 WU_S_ALREADY_DOWNLOADED The update to be downloaded is already downloaded 0x80000007 E_ABORT 0x80004001 E_NOTIMPL 0x80004002 E_Nointerface 0x80004003 E_Pointer Invalid pointer 0x80004004 E_ABORT Operation Aborted 0x80004005 E_Fail 0x80004015 CO_E_WRONG_SERVER_IDENTITY The security descriptor on the BITS service was changed by a security template such that NetworkService account doesn’t have READ access to BITS service. 0x8000FFFF E_UNEXPECTED 0x80010100 RPC_E_SYS_CALL_FAILED 0x80010105 RPC_E_Serverfault 0x80010108 RPC_E_Disconnected 0x80040154 REGDB_E_CLASSNOTREG BITS in Windows 2000 is dependent on SENS and EventSystem services. If COM+ catalog is corrupted, one of these errors was seen. 0x800401F3 CO_E_Classstring 0x800401FD CO_E_Objnotconnected Object is not connected to server 0x80040206 EVENT_E_INTERNALERROR There will be event messages in Application/System log regarding the errors. 0x80070001 ERROR_INVALID_FUNCTION 0x80070002 ERROR_FILE_NOT_FOUND The System cannot find the file specified 0x80070003 COR_E_DIRECTORYNOTFOUND The specified path couldn’t be found — ALLUSERSPROFILE Microsoft network dir doesn’t exist 0x80070005 ERROR_ACCESS_DENIED The authentication method is not supported. — CoCreateInstance(IBackgroundCopyManager) fails with E_ACCESSDENIED (0x80070005) in this condition 0x80070006 E_Handle Handle not valid error 0x80070008 ERROR_NOT_ENOUGH_MEMORY The system is out of memory. 0x8007000B COR_E_BADIMAGEFORMAT The format of the DLL or executable being loaded is invalid 0x8007000D Error_invalid_data 0x8007000E E_OUTOFMEMORY Решение ошибки 0x80070017 ERROR_CRC Data error (cyclic redundancy check). 0x8007001F ERROR_GEN_FAILURE A device attached to the system is not functioning 0x80070020 STIERR_SHARING_VIOLATION The process cannot access the file because it is being used by another process 0x80070032 ERROR_NOT_SUPPORTED 0x80070050 ERROR_FILE_EXISTS 0x80070052 ERROR_CANNOT_MAKE The directory or file cannot be created 0x80070057 ERROR_INVALID_PARAMENTER — E_INVALIDARG One or more arguments are not valid error — Invalid proxy server name was specified in the user’s IE settings and hence WinhttpSetProxySettings call fails with E_INVALIDARG error. BITS puts the job in TRANSIENT_ERROR with the same error code. For ex, if the proxy server is set to http://foo/bar/proxy.pac, this error will be seen. This error is also seen when credentials are supplied such that scheme is not NTLM/Negotiate, but username/password is NULL, since that is not valid (WinhttpSetCredentials fails with E_INVALIDARG. BITS 1.5 puts the job into ERROR state with BG_E_INVALID_RESPONSE in the above 2 cases, because of error code mapping E_INVALIDARG is always mapped to (BG_E_INVALID_SERVER_RESPONSE) 0x80070070 ERROR_DISK_FULL There is not enough space on the disk 0x8007007A ERROR_INSUFFICIENT_BUFFER 0x8007007B STIERR_INVALID_DEVICE_NAME 0x8007007E ERROR_MOD_NOT_FOUND The specified module could not be found. 0x8007007F ERROR_PROC_NOT_FOUND The specified procedure could not be found. 0x80070080 ERROR_WAIT_NO_CHILDREN There are no child processes to wait for 0x800700A1 ERROR_BAD_PATHNAME 0x800700B6 ERROR_INVALID_ORDINAL 0x800700C1 ERROR_BAD_EXE_FORMAT is not a valid Win32 application 0x800700E7 Error_Pipe_Busy All pipe instances are busy 0x80070103 ERROR_NO_MORE_ITEMS: 0x8007010B ERROR_DIRECTORY The directory name is invalid 0x8007012E Error_Disk_Too_Fragmented 0x800701E7 Error_Invalid_Address 0x800703e3 Error_Operation_Aborted The I/O operation has been aborted because of either a thread exit or an application request 0x800703e5 ERROR_IO_PENDING 0x800703E6 Error_Noaccess to memory location Invalid access to memory location 0x800703E7 Error_Swaperror Error performing inpage operation 0x800703EB Error_Can_Not_Complete Cannot complete this function 0x800703Ed ERROR_UNRECOGNIZED_VOLUME The volume does not contain a recognized file system 0x800703F0 ERROR_NO_TOKEN An attempt was made to reference a token that does not exist 0x8007041D ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control request in a timely fashion 0x8007041E Error_Service_No_Thread A thread could not be created for this service 0x8007041F ERROR_SERVICE_DATABASE_LOCKED The service database is locked 0x80070422 ERROR_SERVICE_DISABLED The service cannot be started. If BITS service is disabled by the Administrator, then this error will be seen. 0x80070424 ERROR_SERVICE_DOES_NOT_EXIST Due to a bug in BITS 1.5 OOB setup, after BITS 1.5 install, the BITS service is deleted, but the 1.5 install returns success code. BITS 1.5 binaries are copied to the machine, but the service doesn’t exist. This can also happen if the BITS service is explicitly deleted by running the command sc delete bits 0x80070426 ERROR_SERVICE_NOT_ACTIVE The service has not been started 0x8007042B ERROR_PROCESS_ABORTED 0x8007042C Error_Service_Dependency_Fail 0x80070433 ERROR_SERVICE_DEPENDENCY_DELETED BITS service has a dependency on lanmanworkstation service in BITS 1.0 and 1.2. If “Client for Microsoft networks” network component is uninstalled, then lanmanworkstation service is deleted, but BITS dependency will still be present. After that, BITS service fails to start 0x80070437 Error_Different_Service_Account 0x8007043B ERROR_SERVICE_NOT_IN_EXE The executable program that this service is configured to run does not implement the service. netsvcs registry value in HKLMSoftwareMicrosoftWindowsNTCurrentVersionSvchost registry key should contain the service names that can be run in that service host. On XP and Windows 2003, BITS should be in this value. If “BITS” is missing from that value, then ERROR_SERVICE_NOT_IN_EXE error is seen when attempting to start the service 0x8007045A ERROR_DLL_INIT_FAILED 0x8007045B ERROR_SHUTDOWN_IN_PROGRESS 0x80070490 E_PROP_ID_UNSUPPORTED Permission denied / [Problem initializing or using session variables] or Element not found 0x800704C7 ERROR_CANCELLED Cancelled by user 0x800704DD Error_Not_Logged_On to network 0x80070502 Error_Stack_Buffer_Overrun The system detected an overrun of a stack-based buffer in this application 0x80070570 ERROR_FILE_CORRUPT 0x8007057F Error_Cannot_Find_WND_Class Cannot find windows class 0x8007058D Error_Control_ID_Not_Found 0x800705AA ERROR_NO_SYSTEM_RESOURCE Insufficient system resources exist to complete the requested service 0x800705AD Error_Working_Set_Quota Insufficient quota to complete the requested service 0x800705AF ERROR_COMMITMENT_LIMIT The paging file is too small for this operation to complete 0x800705B4 Error_Timeout 0x80070643 ERROR_INSTALL_FAILURE Решение ошибки 0x80070652 ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress 0x8007066A Error_Patch_Target_Not_Found The program to be upgraded may be missing or the patch may upgrade a different version of the program 0x800706A6 RPC_S_Invalid_Binding Terminal Services optional component is installed on the machine, but the “Terminal Services” service has been disabled. 0x800706B5 RPC_S_Unknown_IF Eventlog service is not running. BITS tries to initialize the event logger object during initialization and fails to start, if the initialization fails. If event log service is not running, then the initialization fails with RPC_S_UNKNOWN_IF error 0x800706BA RPC_S_SERVER_UNAVAILABLE 0x800706BB RPC_S_SERVER_TOO_BUSY The RPC server is too busy to complete this operation 0x800706BE RPC_S_CALL_FAILED 0x800706BF PRC_S_Call_Failed_DNE 0x800706C6 RPC_S_Invalid_Bound The array bounds are invalid 0x800706F7 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered. 0x80070704 Error_Unknown_Port 0x80070BC2 ErrorControlRebootRequired 0x8007276b WSASYSNOTREADY The description of WSASYSNOTREADY says WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. It seems that something is wrong with networking components on the system. 0x8007277B WSASYSCALLFAILURE A system call that should never fail has failed 0x80072AF9 WSAHOST_NOT_FOUND 0x80072AFC WSANO_DATA 0x80072EE2 ERROR_INTERNET_TIMEOUT The request has timed out. 0x80072EE4 ERROR_INTERNET_INTERNAL_ERROR An internal error has occurred. 0x80072EE5 Error_Internet_Invalid_URL 0x80072EE6 ERROR_INTERNET_UNRECOGNIZED_SCHEME The URL scheme could not be recognized or is not supported. 0x80072EE7 ERROR_INTERNET_NAME_NOT_RESOLVED The server name could not be resolved. 0x80072EEF ERROR_INTERNET_LOGIN_FAILURE 0x80072EF1 ERROR_INTERNET_OPERATION_CANCELLED 0x80072EF2 Error_Internet_Incorrect_handle_type 0x80072EF3 Error_Internet_Incorrect_Handle_State 0x80072EFD ERROR_INTERNET_CANNOT_CONNECT The attempt to connect to the server failed. 0x80072EFE ERROR_INTERNET_CONNECTION_ABORTED The connection with the server has been terminated. 0x80072F0C Error_Internet_Client_Auth_Cert_Needed 0x80072F0D ERROR_INTERNET_INVALID_CA 0x80072F76 ERROR_HTTP_HEADER_NOT_FOUND The requested header could not be located 0x80072F78 ERROR_HTTP_INVALID_SERVER_RESPONSE The server response could not be parsed. 0x80072F7c ERROR_HTTP_REDIRECT_FAILED 0x80072F83 ERROR_INTERNET_DISCONNECTED 0x80072F8c ERROR_INTERNET_NOT_INITIALIZED 0x80072F8F ERROR_INTERNET_SECURE_FAILURE ErrorClockWrong One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server. 0x800736B1 Error_SXS_Cant_gen_Actctx This application has failed to start because the application configuration is incorrect. 0x8007F001 STATUS_FAILED_LANGUAGE_TYPE Setup cannot update your files because the languageinstalled on your system is different from the update language. 0x8007F002 STATUS_CHECKED_FREE_MISMATCH Setup cannot update a checked (debug) system with a free (retail) version of , or vice versa. 0x8007F003 STATUS_NOT_ENOUGH_SPACE There is not enough disk space on to install . Setup requires a minimum of d additional megabytes of free space or if you also want to archive the files for uninstall, Setup requires d additional megabytes of free space. Free additional sp 0x8007F004 STATUS_INSUFFICIENT_PRIVS You do not have permission to update . Please contact your system administrator. 0x8007F007 STATUS_CANT_FIND_INF Setup could not find the update.inf file needed to update your system. 0x8007F008 STATUS_UPDATE_SUCCESSFUL has been updated. Remove any disks from the floppy disk drives and choose OK to restart your computer. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007F009 STATUS_UPDATE_UNSUCCESSFUL installation did not complete. 0x8007F00a STATUS_SHUTDOWN_UNSUCCESSFUL Setup was unable to shutdown system. Please shutdown your system manually. 0x8007F00B STATUS_FILE_NOT_FOUND_IN_SETUP_LOG Could not locate entry for HAL.DLL in SETUP.LOG to determine type of HAL to update. 0x8007F00C STATUS_INVALID_INF_FILE The file is not correct. 0x8007F00d STATUS_USER_CANCELLED Setup canceled. 0x8007F00E STATUS_PLATFORM_MISMATCH This is for a different hardware platform. 0x8007F00f STR_CAPTION Setup 0x8007F010 STR_WARNCAPTION Setup Warning 0x8007F011 STR_ERRCAPTION Setup Error 0x8007F012 STR_FAILED_TO_DELETE_OR_RENAME The file is open or in use by another application. Close all other applications and then click Retry. 0x8007F013 STR_FAILED_TO_SAVE_REGISTRY Setup could not backup registry key to file 0x8007F014 STR_FAILED_TO_READ_REGISTRY Setup could not backup registry value 0x8007F015 STR_ASK_DIRTY_UNINSTALL Select »OK» to undo the changes that have been made, or select »Cancel» to quit. If you select »Cancel», your system will be left in a partially updated state and may not work correctly. 0x8007F016 STR_LEAVING_DIRTY has been partially updated and may not work properly. 0x8007F017 STR_ARE_YOU_SURE_CANCEL Are you sure you want to cancel? 0x8007F018 STR_SOURCE_MEDIA_NAME_UNINSTALL Uninstall Directory 0x8007F019 STR_SOURCE_MEDIA_NAME Uninstall Directory 0x8007F01a STR_SOURCE_MEDIA_NAME_SYSTEM System Files 0x8007F01b STR_INST_HOTFIX Setup found hotfixes on your system. Would you like to install these hotfixes now? 0x8007F01c STR_UNINST_ALREADY_CREATED You have already created an Uninstall directory. Doing this again will overwrite your current uninstall directory. Are you sure you want to do this? 0x8007F01d STR_OEM_FILE Your computer vendor installed this file on your computer. Do you want Setup to replace this file? 0x8007F01e STR_CATALOG_INSTALL_FAILED Failed to install catalog files. 0x8007F01f STR_ADD_REGISTRY_FAILED Failed to add registry entry. 0x8007f020 STATUS_BUILD_VERSION_MISMATCH Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d . 0x8007f021 STATUS_SP_VERSION_GREATER The version of Windows you have installed does not match the update you are trying to install. 0x8007f022 STATUS_CANT_SPAWN_HOTFIX Setup could not start the hotfix installation program. 0x8007f023 STATUS_CANT_FIND_TAG Setup could not locate the files. 0x8007f024 STATUS_OVERWRITE_UNINSTALL WARNING: You have chosen to overwrite your existing uninstall: If you continue, you will only be able to uninstall to the following Service Pack version: Are you sure you want to continue? Click Yes to continue creating the 0x8007f026 STATUS_WININET_LOAD_FAILED This Web-based update requires Internet Explorer 3.0 or later. For instructions on how to download a version of this update that does not require a Web connection during installation, download and install from http://www.Microsoft.com/Downloads 0x8007f027 STATUS_CANT_INSTALL_SP_ON_DTC This has not been qualified by your hardware vendor for installation on this copy of Datacenter Server. Please contact your hardware vendor for additional information on obtaining a that has been qualified for your system configuration. 0x8007f028 STATUS_NECESSARY_FILES_NOT_PRESENT Not all files necessary to perform an integrated installation are present. 0x8007f029 STATUS_SPOOLER_NOT_STARTED Cannot install . The Print Spooler service is not started. 0x8007f02a STATUS_MUST_RESTART_FIRST The system must be restarted before installing the , to allow some prior file update operations to complete. (These operations were previously scheduled by some other install or uninstall operation.) 0x8007f02b STATUS_NOT_ENOUGH_WITH_UNINST You do not have enough free disk space on % to archive the uninstall files. To install with backup files for uninstall, an additional dMB is required. 0x8007f02c STATUS_CANT_FIND_RSAENHS Unable to locate RSAENHS.DLL in the update directory, high encryption for uninstall aborted. 0x8007f02d STATUS_CANT_FIND_ENCININF Unable to locate UPDENCIN.INF in the update directory, high encryption for uninstall aborted. 0x8007f02e STATUS_CANT_FIND_ENCTSINF Unable to locate UPDENCTS.INF in the update directory, unable to export TS files. 0x8007f02f STATUS_ENCINST_PROCESS_FAILED High encryption ENCINST process failed. 0x8007f030 STATUS_ENCINST_UPGRADE_FAILED High encryption upgrade failed. 0x8007f031 STR_USAGE_UPDATE AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<path>] [/d:<path>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction or displ 0x8007f032 STR_BUILDING_CAB Creating file 0x8007f033 STR_DOWNLOADING Downloading files and patches 0x8007f034 STR_ARCHIVING_FILES Backing up files 0x8007f035 STR_ARCHIVING_FILE Backing up files 0x8007f036 STR_INSTALLING_FILES Installing files 0x8007f037 STR_INSTALLING_FILE Installing files 0x8007f038 STR_FINISHING_INSTALL Finishing installation 0x8007f039 STR_WELCOME_LINE Welcome to the Setup Wizard 0x8007f03a STR_RESTART &Restart 0x8007f03b STR_COMPLETE installation is complete. You must restart your computer for the update to take effect. 0x8007f03d STR_CANT_CANCEL_NOW Please wait while Setup updates your system files. 0x8007f03e STR_MUST_ACCEPT_TIP Must accept license agreement before installing 0x8007f03f STR_NEED_TO_CONNECT Setup needs to connect to the internet now to download files and patches for installation. 0x8007f040 STR_READY_TO_REPLACE Setup is ready to begin replacing system files. 0x8007f041 STR_CONNECTING Connecting to 0x8007f042 STR_CONNECTED Connected to 0x8007f043 STR_ESTIMATE estimate 0x8007f044 STR_MINUTES minutes 0x8007f045 STR_SECONDS seconds 0x8007f046 STR_DOWNLOAD_REMAINING KB remaining 0x8007f047 STR_DOWNLOAD_COMPLETE Download complete 0x8007f048 STR_DOWNLOAD_UNPACKING Download complete, now unpacking files 0x8007f049 STR_DOWNLOAD_FAILURE The following error occurred while Setup attempted to download the files from the Internet: 0x8007f04a STR_UNKNOWN_ERROR The server did not respond (error code %d). 0x8007f04b STR_INTERNET_TIMEOUT The server did not respond. 0x8007f04c STR_DOWNLOAD_RETRY_TEXT If this error persists after you have clicked Retry several times, download and install from http://www.Microsoft.com/Downloads. This will give you instructions on how to download a version of this update that does not require a Web connection during 0x8007f04d STR_HASH_FAILURE_1 Setup determined that the following downloaded file is corrupt: 0x8007f04e STR_HASH_FAILURE_2 Setup determined that the following downloaded files are corrupt: 0x8007f04f STR_DOWNLOAD_GIVE_UP Setup was unable to download all the files necessary for installation. 0x8007f050 STR_COPYING_FILE_DELAYED Copied file (delayed) 0x8007f051 STR_ERROR_COPY_SLIP An error has occurred copying files from the Service Pack share to the distribution share. 0x8007f052 STR_SLIPSTREAM_SUCCESSFUL Integrated install has completed successfully. 0x8007f053 STR_SLIPSTREAM_FAILED Failed to copy some or all of the files necessary for integrated install. Please check that: a) No network or copy errors occurred during the integration process b) The format of the destination directory is correct. The files to be integrated 0x8007f054 STR_SVCPACK_CMD Service Pack started with following command line 0x8007f055 STR_DOWNLOAD_SIZE bytes downloaded. 0x8007f056 STR_NO_SVCPACK No Service Pack 0x8007f057 STR_MISSING_FILE The file is missing from the installation. The file must be present for Setup to continue. Press OK to cancel Setup. 0x8007f058 STR_READY_TO_ENCINST Setup is ready to begin upgrade of uninstall to high encryption. 0x8007f059 STR_SLIPSTREAM_LANGUAGE_MISMATCH Integrated install failed. The language type or platform for the destination directory and must be the same. 0x8007f05a STATUS_CANT_OPEN_LOG Error opening file 0x8007f05b STR_SKIPPING_FILE Skipped copying file: 0x8007f05c STR_COPY_FILE Copying file 0x8007f05d STR_SVC_INFO In order to successfully complete this installation, the following services will automatically be stopped and re-started. 0x8007f05e STR_SVC_STOP_ERR Setup was unable to stop the following service 0x8007f05f STR_SVC_ASKREBOOT A reboot will probably be required in order to successfully complete this installation. Do you wish to continue? 0x8007f060 STR_SVC_START_ERR Setup was unable to re-start the following service: . 0x8007f061 ERR_STD_PREFIX Setup encountered an error: 0x8007f062 STR_COPYING_FILE Copied file: 0x8007f063 STR_SPAWNING_PROCESS Starting process: 0x8007f064 STATUS_INVALID_VER_FILE The update.ver file is not correct. 0x8007f065 STR_DOMESTIC_TAG1 US/Canada Only, Not for Export 0x8007f066 STR_DOMESTIC_TAG2 Domestic Use Only 0x8007f067 STR_DOMESTIC_TAG3 US and Canada Use Only 0x8007f06a STATUS_SP_VERSION_GREATER_1 Setup has detected that the Service Pack version of the system installed is newer than the update you are applying to it. You can only install this update on Service Pack. 0x8007f06b STATUS_SP_VERSION_GREATER_2 Setup has detected that the Service Pack version of this system is newer than the update you are applying. There is no need to install this update. 0x8007f06c STATUS_FPNW_FIXUP_FAILED Setup failed to access or correctly modify your SETUP.LOG file. 0x8007f06d STATUS_WRONG_PLATFORM The version of software you are running does not match the system you are running it on. 0x8007f06e STATUS_FAILURE_COPYING_FILES Failed to completely copy all of the updated files. 0x8007f06f STATUS_FAILED_TO_SET_DIR Failed to set the directory. 0x8007f070 STATUS_SETUP_ERROR An error in updating your system has occurred. 0x8007f075 STATUS_SUCCESS_NOREBOOT has been updated. You must reboot for these changes to take effect. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007f076 STATUS_SP_VERSION_LESSER Setup has detected that the version of the Service Pack installed on your system is lower than what is necessary to apply this hotfix. At minimum, you must have Service Pack installed. 0x8007f078 STATUS_NO_UNINSTALL_AVAILABLE You cannot uninstall, since an uninstall for has not been created. 0x8007f07a STATUS_SUCCESS_NOREBOOTNEC has been updated. If you change or add any components to your system, you will need to reapply the Hotfix. 0x8007f07b STATUS_UNINST_NOREBOOTNEC Hotfix successfully uninstalled. 0x8007f07c STR_SECURITY_PROVIDER_WARNING The existing file contains High Encryption security, but the updated Hotfix file contains only Standard Encryption security. You can choose to replace the High Encryption security file with the updated Standard Encryption security file now. 0x8007f07f STR_UNINST_HOTFIX Hotfixes have been found on your system. Would you like to Uninstall these hotfixes now? 0x8007f080 STR_OLD_UNINST_EXISTS An old Uninstall directory has been found. Would you like to overwrite this directory with new Uninstall information? 0x8007f081 STR_LICENSE_DECLINED You have chosen to decline the License Agreement. Setup cannot continue. 0x8007f082 STR_NO_LICENSE_TXT No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue. 0x8007f083 STR_INSUFF_RESOURCES Insufficient resources are available. Setup cannot continue. 0x8007f084 STR_FILE_READ_ERROR Error reading LICENSE.TXT file. Setup cannot continue. 0x8007f085 STR_DELETE_OLD_UNINST This old uninstall directory cannot be used to uninstall this Hotfix, and should be deleted. Would you like to delete it now? 0x8007f086 STR_HOTFIXES_FOUND The following hotfixes are installed: 0x8007f087 STR_HOTFIXES_NOT_FOUND No Hotfixes are installed. 0x8007f088 STR_CAT_VERSIONS_EQUAL Catalog file versions are equal, although catalog files differ. Install package must be rebuilt. Failed to install catalog file. 0x8007f089 STR_WINDOWS_TYPE1 Windows NT 4.0 0x8007f08a STR_WINDOWS_TYPE2 Windows 2000 0x8007f08b STR_LICENSE_AGREEMENT License Agreement 0x8007f08c STR_SELECT_OPTIONS Select Options 0x8007f08d STR_UPDATING_YOUR_SYSTEM Updating Your System 0x8007f08e STR_WIZ1_STATIC3 Before you install this update, we recommend that you: — Update your system repair disk — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish this wizard. 0x8007f08f STR_WIZ2_STATIC1 Please read the following license agreement. To continue with setup, you must accept the agreement. 0x8007f090 STR_WIZ2_RADIO1 I &Do Not Agree 0x8007f091 STR_WIZ2_RADIO2 I &Agree 0x8007f092 STR_ASK_BACKUP If you want to remove later, Setup must archive the necessary files. However, this requires significant disk space. Do you want Setup to archive these files? 0x8007f093 STR_ARCHIVE1 &Archive Files 0x8007f094 STR_ARCHIVE2 &Do Not Archive Files 0x8007f095 STR_WIZ4_STATIC2 Please wait while setup inspects your current configuration, archives your current files and updates your files. 0x8007f096 STR_WIZ4_STATIC_OPERATION Inspecting your current configuration 0x8007f097 STR_WIZ4_STATIC_DETAILS inspecting current configuration, archives your current files and updates your files 0x8007f098 STR_WIZ4_STATIC Inspecting current configuration, archives your current files and updates your files 0x8007f099 STR_WIZ5_STATIC1 Completing the Setup Wizard 0x8007f09a STR_WIZ5_STATIC2_REBOOT You have successfully completed the Setup Wizard. To apply the changes, the wizard has to restart Windows. To restart Windows automatically, click Finish. If you want to restart later, select the Do not restart now check box, and then click Fin 0x8007f09b STR_WIZ5_STATIC2_NOREBOOT You have successfully completed the Setup Wizard. To close this wizard, click Finish. 0x8007f09c STR_WIZ5_CHECK1 &Do not restart now 0x8007f09d STR_WIZCAPTION Setup Wizard 0x8007f09e STR_ANALYZE_DISK Checking for necessary space 0x8007f09f STR_BUILDING_CAB_CAPTION Creating Cabinets 0x8007f0a0 STR_CLEAN_REG Updating the registry keys 0x8007f0a1 STR_CANCEL Cancel 0x8007f0a2 STR_DOWNLOAD_UNPACKING_DETAILS Unpacking: %d remaining 0x8007f0a3 STR_NO No LICENSE.TXT file was found in your Hotfix directory. Setup cannot continue. ::No Uninstall directory: Setup is executing. Please wait for Setup to complete :No Service Pack 0x8007f0a4 STR_README Read Me:readmesp.htm 0x8007f0a5 STR_README_FILE readmesp.htm 0x8007f0a6 STR_SLIPSTREAM_EVAL_DESTINATION Integrated install failed. The destination directory contains an evaluation copy of Windows. 0x8007f0a7 STR_WINDOWS_TYPE3 Windows XP 0x8007f0a8 STR_NOUNINSTALL No Uninstall directory 0x8007f0a9 STR_SRVPACK Service Pack 0x8007f0aa STR_WINDOWS_TYPE0 Windows 0x8007f0ab STR_SPOOLER_ENABLE For Setup to continue, the print spooler service must be enabled on this computer. To enable this service, click OK. After Setup is complete, the print spooler will be disabled. 0x8007f0ac STR_USAGE_UPDATE_NOSLPSTRM AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart] [/forcerestart] [/l] [/n] [/o] [/f] [/integrate:<fullpath>] /help Displays this message SETUP MODES /quiet Quiet mode (no user interaction or display) 0x8007f0ad STR_FONT Verdana Bold 0x8007f0ae STR_CHOOSE_UNINST_DIR Select an existing folder or make a new folder in which to store uninstall information. 0x8007f0af STR_ARCHIVE_DRIVE_INVALID You have selected a folder that is not on your local computer. The current state of the computer can be archived only on your local computer. 0x8007f0b0 STR_STARTING_SERVICES Starting services 0x8007f0b1 STR_STARTING_SERVICE Starting service 0x8007f0b2 STR_STOPPING_SERVICES Stopping services 0x8007f0b3 STR_STOPPING_SERVICE Stopping services 0x8007f0b4 STR_WINDOWS_TYPE4 Windows Server 2003 0x8007f0c0 STR_BLOCKLIST_HF_MSG Setup cannot install this hotfix because one or more of its files are out of date. Please download and install the latest version of fix . 0x8007f0c1 STR_BLOCKLIST_SP_MSGA This service pack contains files that are missing some of the fixes which were previously installed on this computer. To prevent possible problems, these files will not be installed by the service pack. 0x8007f0c2 STR_BLOCKLIST_SP_MSGB In order to have the fixes contained in both the service pack and the previously installed hotfixes, you must obtain and install the updated versions of the following hotfixes prior to or following the service pack installation. These hotfixes are also 0x8007f0c3 STR_BLOCKLIST_SP_MSGC Do you want to continue installing this service pack? 0x8007f0c4 STR_BLOCKLIST_SP_MSGD The service pack install cannot continue until these hotfixes are applied to your system. 0x8007f0c5 STR_GENERALCAPTION 2% 0x8007f0c6 STATUS_BUILD_VERSION_MISMATCH2 Setup has detected that the build version of the system installed does not match the update you are applying to it. You can only install this update only on Build %d . 0x8007f0c7 STR_SLPSTRM_COPY Integrating files 0x8007f0c8 STR_SLPSTRM_WIZ4_STATIC2 Please wait while setup integrates files from Windows Service Pack into your Windows installation folder. 0x8007f0c9 STR_SLPSTRMUPDATING_YOUR_SYSTEM Updating Your Windows Share 0x8007f0ca STR_RESTORE_POINT_DESC Installed . 0x8007f0cb STATUS_VLK_BLOCKED The Product Key used to install Windows is invalid. Please contact your system administrator or retailer immediately to obtain a valid Product Key. You may also contact Microsoft Corporation’s Anti-Piracy Team by emailing piracy@microsoft.com 0x8007f0cc STATUS_KERNEL_NONSTD The core system file (kernel) used to start this computer is not a Microsoft Windows file. The Service Pack will not be installed. For more information, see Knowledge Base article at http://support.microsoft.com. 0x8007f0cd STR_VLK_CHECK Checking product key 0x8007f0ce STR_SET_RESTOREPOINT Creating restore point 0x8007f0cf STR_PERFORM_INVENTORY Performing inventory 0x8007f0d0 STR_BUILD_THIRDPARTYDRIVERS Creating Third Party Driver List 0x8007f0d1 STR_DISK_USAGEFORINSTALL Estimating space for installation 0x8007f0d2 STR_DISK_USAGEFORUNINSTALL Estimating space for uninstallation 0x8007f0d3 STR_PROCESSES_BEFOREARCHIVE Running processes before install 0x8007f0d4 STR_REGISTRY_BACKUP Backing up registry 0x8007f0d5 STR_PROCESSES_AFTERINSTALL Running processes after install 0x8007f0d6 STR_PERFORM_CLEANUP Performing cleanup 0x8007f0d7 STR_OPTIONAL_EXCLUSIONWARNING Windows has detected that one or more protected files on your computer have been modified. The Service Pack contains updated versions of those files, which work to provide a stable environment for your programs. If you click Yes, the updated version 0x8007f0d8 STR_WIZ1_STATIC3_XP Before you install this update, we recommend that you: — Back up your system — Close all open programs To complete this installation, Windows might require restarting after you finish this wizard. 0x8007f0d9 STR_ARCHIVE_FOLDER_INVALID The folder name is longer than the limit of 226 bytes. Enter a shorter name. 0x8007f0da STR_FAILED_INF_INTEGRITY Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on this computer. 0x8007f0db STR_BLOCKLIST_FIXNUMBER Fix Number 0x8007f0dc STR_BLOCKLIST_FILENAME File Name 0x8007f0dd STR_BLOCKLIST_VERSION Version 0x8007f0de STR_WIZ4_NOARCHIVE Please wait while setup inspects your current configuration and updates your files. 0x8007f0df STATUS_SP_BUILD_TO_BUILD This Service Pack cannot be installed on top of the build currently installed on your computer. Cancel this installation process, uninstall your current build, then re-install this Service Pack. 0x8007f0e0 STR_UNABLE_TO_VERIFY Setup could not verify the integrity of one or more installed files. 0x8007f0e2 STR_ERR_PRINT_EULA Unable to print the END USER LICENSE AGREEMENT 0x8007f0e3 STR_WINDOWS_TYPE Windows, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2000, Windows XP Version 2003 0x8007f0e4 STATUS_WINDOWS_VERSION_NEWER The version of Windows you have installed is newer than the update you are trying to install. There is no need to install this update. 0x8007f0e5 STATUS_PACKAGE_NOT_APPLICABLE This package does not apply to the operating system you are running, and therefore cannot be installed. 0x8007f0e6 STR_SAFEMODE_INSTALL You are trying to install while the system is in safe mode. This is not recommended unless the system does not function in normal mode. 0x8007f0e7 STR_APPLYING_HOTPATCHES Applying Hotpatches 0x8007f0e8 STATUS_INVALID_BRANCHES_INF The branches.inf file is invalid. 0x8007f0e9 STATUS_INVALID_UPDATEBR_INF The updatebr.inf file is invalid. 0x8007f0ea STR_PACKAGE_MIGRATE_FAILED Failed to migrate dependent packages. 0x8007f0ec STR_PERFORM_MIGRATION Performing migration 0x8007f0ed STATUS_NO_BRANCH_AVAILABLE Required installation branch was not found in INF file. 0x8007f0ee STR_BLOCKLIST_PACKAGE Package 0x8007f0ef STR_MIGRATE_BLOCKLIST_MSG The installation cannot continue because the following packages might not be valid: 0x8007f0f0 STR_BRANCH_CAPTION Branch info 0x8007f0f1 STATUS_INCOMPARABLE_BRANCHES Files from the package are incompatible with files on your system. 0x8007f0f2 STR_MIGRATE_BLOCKLIST_REC Reinstall the packages listed above, and then install . 0x8007f0f3 STR_UNKNOWN_PACKAGE Unknown 0x8007f0f4 STATUS_PREREQUISITE_FAILED Setup cannot continue because one or more pre-requisites required to install failed. For More details check the Log File. Update.exe can throw this error when it starts to download if the computer is running under battery power (there may be a fix for this in the future). 0x8007f0f5 STR_WINDOWS_TYPE5 Windows XP Version 2003 0x8007F0F6 NULL 0x8007f0f7 STR_HFSLP_ERROR An error occurred while attempting to integrate this software update package. Verify that the architecture, language, and service pack level of this software update are valid for the target distribution folder. 0x8007f0f8 STR_HFSLP_EXPRESS Express software update packages cannot be integrated. To download a version of the fix that can be integrated, visit http://www.microsoft.com/downloads. 0x8007f0f9 STR_HFSLP_EXTRACTED Extracted packages cannot be integrated. The /integrate switch must be used with the original software update package. 0x8007f0fa STR_HFSLP_NOTFOUND Setup was unable to locate the distribution folder that you wish to integrate with this software update package. The /integrate switch requires the full path to the distribution folder. 0x8007f200 STATUS_MORE_FILES_FOR_DOWNLOAD More byte ranges required. 0x8007f201 STATUS_READY_TO_INSTALL Required payload available, ready to install. 0x8007f202 STATUS_PATCH_NOT_FOUND The delta was not found in the PSF. Update cannot find information about how to upgrade this binary. SUS can terminate installation. 0x8007f203 STATUS_PATCH_FILE_CORRUPT Update cannot find information about how to upgrade this binary 0x8007f204 STATUS_INDEXFILE_CORRUPT Index file does not have a valid signature. Index file has an invalid signature. The package is corrupt. SUS can terminate installation. 0x8007f205 STR_UPDATE_ALREADY_RUNNING Setup has detected that another update is in progress. Please complete that installation or removal and try again. 0x8007f206 STATUS_RETRY_REFRESH_INVENTORY The state of machine changed since last inventory analysis. Update.exe has to restart the process with /si. 0x8007f207 STATUS_RETRY_SELF_CONTAINED Two consecutive attempts to download delta failed without any progress and there is no use in continuing as express package. Revert to self-contained package. 0x8007f220 STATUS_CONTINUE_INVENTORY error codes should not be returned out of update.exe 0x8007f221 ERROR_INDEXFILE_NOT_FOUND error codes should not be returned out of update.exe 0x80080005 CO_E_Server_Exec_Failure 0x80080008 CO_E_SERVER_STOPPING 0x80090006 NTE_Bad_Signature 0x8009000B NTE_Bad_Key_State 0x80090017 NTE_PROV_TYPE_NOT_DEF 0x8009001D Error_Write_Fault 0x80090305 SEC_E_SECPKG_NOT_FOUND The requested security package does not exist 0x80090331 Sec_E_Algorithm_Mismatch The client and the server cannot communicate, because they do not possess a common algorithm 0x8009033F SEC_E_Shutdown_IN_Progress 0x80092003 CRYPT_E_File_Error An error occurred while reading or writing to a file 0x80092004 CRYPT_E_NOT_FOUND Решение ошибки 0x8009200D Crypt_E_Bad_Msg Not a cryptographic message or the cryptographic message is not formatted correctly 0x80092026 Crypt_E_Security_Settings The cryptographic operation failed due to a local security option setting 0x80096001 Trust_E_System_Error A system-level error occurred while verifying trust 0x80096005 Trust_E_Time_Stamp could not be verified 0x80096010 Trust_E_Bad_Digest The digital signature of the object did not verify 0x80096019 TRUST_E_BASIC_CONSTRAINTS 0x800A0046 CTL_PermissionDenied olectl.h 0x800a01ae IXP_NNTP_NO_SUCH_ARTICLE_FOUND This can occur after a control selfupdate that has not fully completed and requires a reboot. 0x800a138f ERROR_RESOURCE_NOT_FOUND Javascript runtime error 0x800B0001 Trust_E_Provider_Unknown Решение ошибки 0x800B0002 Trust_E_ActionUnknown The trust verification action specified is not supported by the specified trust provider. 0x800B0003 TRUST_E_SUBJECT_FORM_UNKNOWN The form specified by the subject is not one supported or known by the specified trust provider 0x800B0004 TRUST_E_SUBJECT_NOT_TRUSTED The subject is not trusted for the specified action. 0x800B0100 TRUST_E_NOSIGNATURE No signature was present in the subject 0x800B0101 Cert_E_Expired Verifying against the current system clock or the timestamp in the signed file 0x800B0109 CERT_E_UNTRUSTEDROOT A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider 0x800b010d Cert_E_Untrustedtestroot The certification path terminates with the test root which is not trusted with the current policy settings 0x800B0110 CERT_E_WRONG_USAGE 0x800C0002 Inet_E_Invalid_URL 0x800F0101 SPAPI_E_Section_Not_Found The required section was not found in the INF 0x800F020B SPAPI_E_No_Such_Devinst device instance does not exist 0x800F0217 SPAPI_E_Bad_Service_Installsect A service installation section in this INF is invalid 0x800F022B SPAPI_E_DI_Dont_Install The class installer has denied the request to install or upgrade this device 0x800F022F SPAPI_E_No_Catalog_for_OEM_INF The third-party INF does not contain digital signature information 0x800F0244 SPAPI_E_Signature_Osattribure_Mismatch The software was tested for compliance on a different version of Windows and may not be compatible with this version 0x800FF8F0 NULL 0x800FFBBE NULL 0x800FFC02 NULL 0x800FFC0D NULL 0x80190064 BG_E_HTTP_ERROR_100 The request can be continued. 0x80190065 BG_E_HTTP_ERROR_101 The server switched protocols in an upgrade header. 0x801900C8 BG_E_HTTP_ERROR_200 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801900C9 BG_E_HTTP_ERROR_201 The request was fulfilled and resulted in the creation of a new resource. 0x801900CA BG_E_HTTP_ERROR_202 The request was accepted for processing, but the processing has not been completed yet. 0x801900CB BG_E_HTTP_ERROR_203 The returned metadata in the entity-header is not the definitive set available from the server of origin. 0x801900CC BG_E_HTTP_ERROR_204 The server has fulfilled the request, but there is no new information to send back. 0x801900CD BG_E_HTTP_ERROR_205 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801900CE BG_E_HTTP_ERROR_206 The server fulfilled the partial GET request for the resource. 0x8019012C BG_E_HTTP_ERROR_300 The server could not return the requested data. 0x8019012D BG_E_HTTP_ERROR_301 The requested resource was assigned to a new permanent Uniform Resource Identifier (URI), and any future references to this resource should use one of the returned URIs. 0x8019012E BG_E_HTTP_ERROR_302 The requested resource was assigned a different Uniform Resource Identifier (URI). This change is temporary. 0x8019012F BG_E_HTTP_ERROR_303 The response to the request is under a different Uniform Resource Identifier (URI) and must be retrieved using a GET method on that resource. 0x80190130 BG_E_HTTP_ERROR_304 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x80190131 BG_E_HTTP_ERROR_305 The requested resource must be accessed through the proxy given by the location field. 0x80190133 BG_E_HTTP_ERROR_307 The URL has been temporarily relocated. Try again later. 0x80190190 BG_E_HTTP_ERROR_400 The server cannot process the request because the syntax is not valid. 0x80190191 BG_E_HTTP_ERROR_401 The requested resource requires user authentication. 0x80190192 BG_E_HTTP_ERROR_402 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x80190193 BG_E_HTTP_ERROR_403 The client does not have sufficient access rights to the requested server object. Cannot execute requested URL in the current application pool IIS returns this error in some transient error cases too such as 403.9 — Forbidden: Too many clients are trying to connect to the Web server.403.15 — Forbidden: Client access licenses have exceeded limits on the Web server. 0x80190194 BG_E_HTTP_ERROR_404 The requested URL does not exist on the server. 0x80190195 BG_E_HTTP_ERROR_405 The method used is not allowed. 0x80190196 BG_E_HTTP_ERROR_406 No responses acceptable to the client were found. 0x80190197 BG_E_HTTP_ERROR_407 Proxy authentication is required. 0x80190198 BG_E_HTTP_ERROR_408 The server timed out waiting for the request. 0x80190199 BG_E_HTTP_ERROR_409 The request could not be completed because of a conflict with the current state of the resource. The user should resubmit the request with more information. 0x8019019A BG_E_HTTP_ERROR_410 The requested resource is not currently available at the server, and no forwarding address is known. 0x8019019B BG_E_HTTP_ERROR_411 The server cannot accept the request without a defined content length. 0x8019019C BG_E_HTTP_ERROR_412 The precondition given in one or more of the request header fields evaluated to false when it was tested on the server. 0x8019019D BG_E_HTTP_ERROR_413 The server cannot process the request because the request entity is too large. 0x8019019E BG_E_HTTP_ERROR_414 The server cannot process the request because the request Uniform Resource Identifier (URI) is longer than the server can interpret. 0x8019019F BG_E_HTTP_ERROR_415 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801901A1 BG_E_HTTP_ERROR_417 The server could not meet the expectation given in an Expect request-header field. 0x801901C1 BG_E_HTTP_ERROR_449 The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x801901F4 BG_E_HTTP_ERROR_500 The server encountered an unexpected condition that prevented it from fulfilling the request. 0x801901F5 BG_E_HTTP_ERROR_501 The server does not support the functionality required to fulfill the request. 0x801901F6 BG_E_HTTP_ERROR_502 The server, while acting as a gateway or proxy to fulfill the request, received an invalid response from the upstream server it accessed. 0x801901F7 BG_E_HTTP_ERROR_503 The service is temporarily overloaded. 0x801901F8 BG_E_HTTP_ERROR_504 The request was timed out waiting for a gateway. Can typically be a DNS issue 0x801901F9 BG_E_HTTP_ERROR_505 The server does not support the HTTP protocol version that was used in the request message. 0x801901FA NULL 0x80194000 BITS_MC_JOB_CANCELLED The administrator canceled job on behalf of %3. The job ID was %1. 0x80194001 BITS_MC_FILE_DELETION_FAILED While canceling job, BITS was not able to remove the temporary files. 0x80194002 BITS_MC_FILE_DELETION_FAILED_MORE Due to space limitations, not all files are listed here. Check for additional files of the form BITxxx.TMP in the same directory. 0x80194003 BITS_MC_JOB_PROPERTY_CHANGE The administrator modified the property of job. The job ID was %1. 0x80194004 BITS_MC_JOB_TAKE_OWNERSHIP The administrator took ownership of job. The job ID was %1. 0x80194005 BITS_MC_JOB_SCAVENGED Job was canceled after being inactive for more than xx days. The job ID was %1. 0x80194006 BITS_MC_JOB_NOTIFICATION_FAILURE Job failed to notify its associated application. BITS will retry in xx minutes. The job ID was %1. 0x80194007 BITS_MC_STATE_FILE_CORRUPT The BITS job list is not in a recognized format. It may have been created by a different version of BITS. The job list has been cleared. 0x80194008 BITS_MC_FAILED_TO_START The BITS server failed to start. Try restarting the service at a later time. 0x80200001 BG_E_Not_Found The requested job was not found. 0x80200002 BG_E_INVALID_STATE The requested action is not allowed in the current job state. The job might have been canceled or completed transferring. It is in a read-only state now. 0x80200003 BG_E_EMPTY There are no files attached to this job. Attach files to the job, and then try again. 0x80200004 BG_E_FILE_NOT_AVAILABLE No file is available because no URL generated an error. 0x80200005 BG_E_PROTOCOL_NOT_AVAILABLE No protocol is available because no URL generated an error. 0x80200006 BG_S_ERROR_CONTEXT_NONE No errors have occurred. 0x80200007 BG_E_ERROR_CONTEXT_UNKNOWN The error occurred in an unknown location. 0x80200008 BG_E_ERROR_CONTEXT_GENERAL_QUEUE_MANAGER The error occurred in the Background Intelligent Transfer Service (BITS) queue manager. 0x80200009 BG_E_ERROR_CONTEXT_LOCAL_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again. 0x8020000A BG_E_ERROR_CONTEXT_REMOTE_FILE The error occurred while the local file was being processed. Verify that the file is not in use, and then try again. 0x8020000B BG_E_ERROR_CONTEXT_GENERAL_TRANSPORT The error occurred in the transport layer. The client could not connect to the server. 0x8020000C BG_E_ERROR_CONTEXT_QUEUE_MANAGER_NOTIFICATION The error occurred while the notification callback was being processed. Background Intelligent Transfer Service (BITS) will try again later. 0x8020000D BG_E_Destination_Locked The destination file system volume is not available. Verify that another program, such as CheckDisk, is not running, which would lock the volume. When the volume is available, Background Intelligent Transfer Service (BITS) will try again. 0x8020000E BG_E_VOLUME_CHANGED The destination volume has changed. If the disk is removable, it might have been replaced with a different disk. Reinsert the original disk and resume the job. 0x8020000F BG_E_ERROR_INFORMATION_UNAVAILABLE No errors have occurred. 0x80200010 BG_E_NETWORK_DISCONNECTED There are currently no active network connections. Background Intelligent Transfer Service (BITS) will try again when an adapter is connected. 0x80200011 BG_E_MISSING_FILE_SIZE When BITS sends a HEAD request and server/proxy doesn’t return Content-Length header in the response, BITS puts the job in ERROR state with BG_E_MISSING_FILE_SIZE. BITS 1.5 puts the job in ERROR state with BG_E_INVALID_SERVER_RESPONSE error. Apache 2.0 proxy server is known to exhibit this behavior. 0x80200012 BG_E_INSUFFICIENT_HTTP_SUPPORT The server does not support HTTP 1.1. 0x80200013 BG_E_INSUFFICIENT_RANGE_SUPPORT BITS uses range header in HTTP requests to request parts of a file. If the server or proxy doesn’t understand Range requests and returns full file instead of the requested range, BITS puts the job in ERROR state. Apache 1.3 proxy is known to show this behavior if the requested file is already in the cache. 0x80200014 BG_E_REMOTE_NOT_SUPPORTED Background Intelligent Transfer Service (BITS) cannot be used remotely. 0x80200015 BG_E_NEW_OWNER_DIFF_MAPPING The drive mapping for the job is different for the current owner than for the previous owner. Use a UNC path instead. 0x80200016 BG_E_NEW_OWNER_NO_FILE_ACCESS The new owner has insufficient access to the local files for the job. The new owner might not have permissions to access the job files. Verify that the new owner has sufficient permissions, and then try again. 0x80200017 BG_S_PARTIAL_COMPLETE Some of the transferred files were deleted because they were incomplete 0x80200018 BG_E_PROXY_LIST_TOO_LARGE The HTTP proxy list cannot be longer than 32,000 characters. Try again with a shorter proxy list. 0x80200019 BG_E_PROXY_BYPASS_LIST_TOO_LARGE The HTTP proxy bypass list cannot be longer than 32,000 characters. Try again with a shorter bypass proxy list. 0x8020001A BG_S_UNABLE_TO_DELETE_FILES Some of the temporary files could not be deleted. Check the system event log for the complete list of files that could not be deleted. 0x8020001B BG_E_INVALID_SERVER_RESPONSE The server’s response was not valid. The server was not following the defined protocol. Resume the job, and then Background Intelligent Transfer Service (BITS) will try again. 0x8020001C BG_E_TOO_MANY_FILES No more files can be added to this job. 0x8020001D BG_E_LOCAL_FILE_CHANGED The local file was changed during the transfer. Recreate the job, and then try to transfer it again. 0x8020001E BG_E_ERROR_CONTEXT_REMOTE_APPLICATION The program on the remote server reported the error. 0x8020001F BG_E_SESSION_NOT_FOUND The specified session could not be found on the server. Background Intelligent Transfer Service (BITS) will try again. 0x80200020 BG_E_TOO_LARGE The job is too large for the server to accept. This job might exceed a job size limit set by the server administrator. Reduce the size of the job, and then try again. 0x80200021 BG_E_STRING_TOO_LONG The specified string is too long. 0x80200022 BG_E_CLIENT_SERVER_PROTOCOL_MISMATCH The client and server versions of Background Intelligent Transfer Service (BITS) are incompatible. 0x80200023 BG_E_SERVER_EXECUTE_ENABLE Scripting OR execute permissions are enabled on the IIS virtual directory associated with the job. To upload files to the virtual directory, disable the scripting and execute permissions on the virtual directory. 0x80200024 BG_E_No_Progress BITS The job is not making headway. The server may be misconfigured. Background Intelligent Transfer Service (BITS) will try again later. 0x80200025 BG_E_USERNAME_TOO_LARGE The user name cannot be longer than 300 characters. Try again with a shorter name. 0x80200026 BG_E_PASSWORD_TOO_LARGE The password cannot be longer than 300 characters. Try again with a shorter password. 0x80200027 BG_E_INVALID_AUTH_TARGET The authentication target specified in the credentials is not defined. 0x80200028 BG_E_INVALID_AUTH_SCHEME The authentication scheme specified in the credentials is not defined. 0x80200029 BG_E_FILE_NOT_FOUND The specified file name does not match any of the files in the job. 0x8020002A BG_S_PROXY_CHANGED The proxy server was changed. 0x8020002B BG_E_INVALID_RANGE The requested byte range extends beyond the end of the web page. Use byte ranges that are wholly within the page. 0x8020002C BG_E_OVERLAPPING_RANGES The list of byte ranges contains some overlapping ranges, which are not supported. 0x8020002D BG_E_CONNECT_FAILURE A connection could not be established. 0x8020002E BG_E_CONNECTION_CLOSED The connection was prematurely closed. 0x8020002F BG_E_KEEP_ALIVE_FAILURE The connection for a request that specifies the Keep-alive header was closed unexpectedly. 0x80200030 BG_E_MESSAGE_LENGTH_LIMIT_EXCEEDED A message was received that exceeded the specified limit when sending a request or receiving a response from the server. 0x80200031 BG_E_NAME_RESOLUTION_FAILURE The host name could not be found. 0x80200032 BG_E_PENDING An internal asynchronous request is pending. 0x80200033 BG_E_PIPELINE_FAILURE 0x80200034 BG_E_PROTOCOL_ERROR The response received from the server was complete but indicated a protocol-level error. 0x80200035 BG_E_PROXY_NAME_RESOLUTION_FAILURE The proxy name could not be found. 0x80200036 BG_E_RECEIVE_FAILURE A complete response was not received from the server. 0x80200037 BG_E_REQUEST_CANCELED The request was canceled. 0x80200038 BG_E_SECURE_CHANNEL_FAILURE An error occurred while establishing a connection using SSL. 0x80200039 BG_E_SEND_FAILURE complete request could not be sent to the remote server. 0x8020003A BG_E_SERVER_PROTOCOL_VIOLATION The server response was not valid. 0x8020003B BG_E_TIMEOUT The operation exceeded the time limit. 0x8020003C BG_E_TRUST_FAILURE A server certificate could not be validated. 0x8020003D BG_E_UNKNOWN_ERROR A unknown error occured. 0x8020003E BG_E_BLOCKED_BY_POLICY Group Policy settings prevent background jobs from running at this time. 0x8020003F BG_E_INVALID_PROXY_INFO The supplied proxy server or bypass list is invalid. 0x80200040 BG_E_INVALID_CREDENTIALS The format of the supplied security credentials is invalid. 0x80240001 SUS_E_NO_SERVICE for whatever reason, SUS agent can not provide the service 0x80240002 SUS_E_MAX_CAPACITY_REACHED maximum capacity of the service is reached 0x80240003 SUS_E_UNKNOWN_ID id not found 0x80240004 SUS_E_NOT_INITIALIZED object is not correctly initialized 0x80240005 SUS_E_RANGEOVERLAP Update handler attempted to request a byte range that overlapped a previously requested byte range 0x80240006 SUS_E_TOOMANYRANGES Update handler attempted to request too many ranges 0x80240007 SUS_S_ALREADY_UNINSTALLED — SUS_E_INVALIDINDEX The update to be uninstalled is already not installed — An attempt was made to use an invalid index 0x80240008 SUS_E_ITEMNOTFOUND A query was made for an item with a particular key and that key was not found 0x80240009 SUS_E_OPERATIONINPROGRESS The caller attempted to perform an operation on an interface while another operation was in progress. 0x8024000a SUS_E_COULDNOTCANCEL The caller attempted to cancel an operation that is not cancelable 0x8024000B SUS_E_CALL_CANCELLED call has been cancelled 0x8024000C SUS_E_NOOP no operation is needed 0x8024000D SUS_E_XML_MISSINGDATA the SUS agent is attempting to parse an update’s XML blob and has not found expected data 0x8024000E SUS_E_XML_INVALID the SUS agent is attempting to parse an update’s XML blob and has encountered data that is invalid 0x8024000F SUS_E_CYCLE_DETECTED cycle detected in meta data 0x80240010 SUS_E_TOO_DEEP_RELATION too deep relation ship found 0x80240011 SUS_E_REG_VALUE_INVALI registry value was read but is invalid 0x80240012 SUS_E_REG_VALUE_INVALID registry value was read but is invalid 0x80240013 SUS_E_EE_UNKNOWN_EXPRESSION an expression handler was passed an expression that it doesn’t know about 0x80240014 SUS_E_EE_INVALID_EXPRESSION an expression handler was passed an expression that is bad. 0x80240015 SUS_E_EE_MISSING_METADATA an expression handler was passed an expression that requires an applicability metadata blob, but did not receive one or received too many. 0x80240016 SUS_E_INSTALL_NOT_ALLOWE try to install while another install is going on or reboot is pending 0x80240017 SUS_E_NOT_APPLICABLE install is not needed because no updates are applicable 0x80240018 WU_E_NO_USERTOKEN operation failed due to missing user token 0x80240019 WU_E_EXCLUSIVE_INSTALL_CONFliCT try to install an exclusive update with other updates at the same time 0x8024001a WU_E_POLICY_NOT_SET policy value is not set 0x8024001b WU_E_SELFUPDATE_IN_PROGRESS self-update in progress 0x8024001C SUS_E_WRONGMSIVERSION 0x8024001D WU_E_INVALID_UPDATE an update had bogus metadata 0x8024001E WU_E_SERVICE_STOP call was aborted due to service stop or system shut down 0x8024001F SUS_E_NO_CONNECTION no network connection is available to finish the operation 0x80240020 SUS_E_NO_INTERACTIVE_USER interactive user is missing to finish the operation 0x80240021 WU_E_TIME_OUT operation timed out 0x80240022 WU_E_ALL_UPDATES_FAILED operation failed on all specified updates 0x80240023 WU_E_EULAS_DECLINED EULA’s for all the updates are declined 0x80240024 WU_E_NO_UPDATE there are no update 0x80240025 WU_E_USER_ACCESS_DISABLED User access to Windows Update is prevented by Group Policy setting 0x80240026 WU_E_INVALID_UPDATE_TYPE invalid type of update 0x80240027 WU_E_URL_TOO_LONG URL is too long 0x80240028 WU_E_UNINSTALL_NOT_ALLOWED uninstall is not allowed due to non managed environment 0x80240029 WU_E_INVALID_PRODUCT_LICENSE A product with an invalid license was found on the system. 0x8024002a WU_E_MISSING_HANDLER A component required for detecting applicable updates was missing. 0x8024002b WU_E_LEGACYSERVER The Sus server we are talking to is a Legacy Sus Server (Sus Server 1.0) 0x8024002c WU_E_BIN_SOURCE_ABSENT A binary-delta patch failed because the source was required 0x8024002d WU_E_FF_SOURCE_ABSENT a full-file patch failed because the source was required 0x8024002E SUS_E_WU_DISABLED non managed server access is disallowed 0x8024002f WU_E_CALL_CANCELLED_BY_POLICY call cancelled because of DisableWindowsUpdateAccess policy takes effect 0x80240030 WU_E_INVALID_PROXY_SERVER invalid format for proxy list 0x80240031 WU_E_INVALID_FILE file is not of the right format 0x80240032 WU_E_INVALID_CRITERIA invalid criteria string 0x80240033 WU_E_EULA_UNAVAILABLE EULA download failure 0x80240034 WU_E_DOWNLOAD_FAILED Failed to download 0x80240035 WU_E_UPDATE_NOT_PROCESSED INTERNAL ONLY: The update was not processed. 0x80240036 WU_E_INVALID_OPERATION The operation is invalid for the object’s current state. 0x80240037 WU_E_NOT_SUPPORTED The invoked functionality is not supported (80240037). 0x80240FFF WU_E_UNEXPECTED generic unexpected failure 0x80241001 WU_E_MSI_WRONG_VERSION The MSI version on the machine is less than what we expect (SUS 2.0 requires MSI 3.0) 0x80241002 WU_E_MSI_NOT_CONFIGURED MSI is not configured 0x80241003 WU_E_MSP_DISABLED MSI patching is disabled by policy 0x80241fff U_E_MSP_UNEXPECTED generic unexpected MSP failure 0x80242000 SUS_E_UH_REMOTEUNAVAILABLE The caller requested a remote object, but no remote process is available 0x80242001 WU_E_UH_LOCALONLY The caller requested a remote object, but the specified handler is local only 0x80242002 WU_E_UH_UNKNOWNHANDLER The caller requested an unknown handler object 0x80242003 WU_E_UH_REMOTEALREADYACTIVE The caller requested an unknown handler object 0x80242004 SUS_E_UH_DOESNOTSUPPORTACTION The update does not support the current action (install or uninstall) 0x80242005 SUS_E_UH_WRONGHANDLER The caller tried to use the wrong handler for an action 0x80242006 SUS_E_UH_INVALIDMETADATA The caller passed an update with invalid metadata to the handler 0x80242007 SUS_E_UH_INSTALLERHUNG The installer took too long and was terminated 0x80242008 SUS_E_UH_OPERATIONCANCELLED The install was canceled via a handler method (as opposed to, for example, an installer running with UI that was cancelled externally to SUS) 0x80242009 SUS_E_UH_BADHANDLERXML The XML contained in the handler specific data for the update is invalid. 0x8024200a WU_E_UH_CANREQUIREINPUT The update may require user input so can not be installed in this context. 0x8024200B SUS_E_UH_INSTALLERFAILURE At least one update passed to the handler failed to install. 0x8024200c WU_E_UH_FALLBACKTOSELFCONTAINED Handler should fall back to self-contained from delta. 0x8024200D SUS_E_UH_NEEDANOTHERDOWNLOAD The installer requires more data to be downloaded 0x8024200E WU_E_UH_NOTIFYFAILURE The attempted operation was not allowed 0x80242fff WU_E_UH_UNEXPECTED generic unexpected update handler failure 0x80243fff WU_E_AUCLIENT_UNEXPECTED generic unexpected UI [AU Client] failures 0x80244000 WU_E_PT_SOAPCLIENT_BASE Used as a base to map SOAPCLIENT_ERROR errors. 0x80244001 SUS_E_PT_SOAPCLIENT_INITIALIZE SOAPCLIENT_INITIALIZE_ERROR initialization failed — most likely an MSXML installation problem 0x80244002 WU_E_PT_SOAPCLIENT_OUTOFMEMORY SOAPCLIENT_OUTOFMEMORY out of memory 0x80244003 WU_E_PT_SOAPCLIENT_GENERATE SOAPCLIENT_GENERATE_ERROR failed in generating the response 0x80244004 SUS_E_PT_SOAPCLIENT_CONNECT failed connecting to server 0x80244005 WU_E_PT_SOAPCLIENT_SEND SOAPCLIENT_SEND_ERROR failed in sending message. This generic error has been deprecated in favor of the more specific underlying WinHTTP errors, which will be returned when the client encounters an error communicating with the server. 0x80244006 WU_E_PT_SOAPCLIENT_SERVER SOAPCLIENT_SERVER_ERROR server error 0x80244007 WU_E_PT_SOAPCLIENT_SOAPFAULT SOAPCLIENT_SOAPFAULT a SOAP Fault was returned by the server. See the more specific WU_E_PT_SOAP_xxxx mappings when a SOAP fault was returned by the server. 0x80244008 SUS_E_PT_SOAPCLIENT_PARSEFAULT SOAPCLIENT_PARSEFAULT_ERROR failed in parsing SOAP fault 0x80244009 WU_E_PT_SOAPCLIENT_READ SOAPCLIENT_READ_ERROR failed in reading response 0x8024400A SUS_E_PT_SOAPCLIENT_PARSE failed in parsing response 0x8024400b WU_E_PT_SOAP_VERSION SOAP_E_VERSION_MISMATCH Invalid namespace for the SOAP envelope 0x8024400c WU_E_PT_SOAP_MUST_UNDERSTAND SOAP_E_MUST_UNDERSTAND Child of header with mustUnderstand attribute = 1 wasn’t understood or obeyed 0x8024400D SUS_E_PT_SOAP_CLIENT SOAP_E_CLIENT The message was malformed or incomplete. No reason to retry unless problem fixed. 0x8024400E SUS_E_PT_SOAP_SERVER The message was OK but server couldn’t process at the moment. Same message *may* succeed at a later time. 0x8024400f WU_E_PT_WMI_ERROR An unspecified error occurred using WMI 0x80244010 SUS_E_PT_EXCEEDED_MAX_SERVER_TRIPS The maximum allowed number of round trips to the server was exceeded
Решение ошибки 0x80244011 SUS_E_PT_SUS_SERVER_NOT_SET WUServer policy value is missing in the registry 0x80244012 WU_E_PT_DOUBLE_INITIALIZATION object is initialized second time 0x80244013 WU_E_PT_INVALID_COMPUTER_NAME Cannot determine computer name 0x80244014 WU_E_PT_INVALID_COMPUTER_LSID Cannot determine computer LSID 0x80244015 SUS_E_PT_REFRESH_CACHE_REQUIRED Server replied with InvalidCookie or ServerChanged Caller should refresh its internal state then repeat the call to Protocol Talker 0x80244016 SUS_E_PT_HTTP_STATUS_BAD_REQUEST Http status 400 — invalid syntax 0x80244017 SUS_E_PT_HTTP_STATUS_DENIED Http status 401 — access denied 0x80244018 SUS_E_PT_HTTP_STATUS_FORBIDDEN Http status 403 — request forbidden 0x80244019 SUS_E_PT_HTTP_STATUS_NOT_FOUND Http status 404 — object not found (0x80244019) 0x8024401A SUS_E_PT_HTTP_STATUS_BAD_METHOD Http status 405 — method is not allowed 0x8024401B SUS_E_PT_HTTP_STATUS_PROXY_AUTH_REQ Http status 407 — proxy authentication required 0x8024401c WU_E_PT_HTTP_STATUS_REQUEST_TIMEOUT Http status 408 — server timed out waiting for request (0x8024401c) 0x8024401d WU_E_PT_HTTP_STATUS_CONFLICT Http status 409 — user should resubmit with more info 0x8024401e WU_E_PT_HTTP_STATUS_GONE Http status 410 — the resource is no longer available 0x8024401f WU_E_PT_HTTP_STATUS_SERVER_ERROR Http status 500 — internal server error 0x80244020 WU_E_PT_HTTP_STATUS_NOT_SUPPORTED Http status 501 — required not supported 0x80244021 SUS_E_PT_HTTP_STATUS_BAD_GATEWAY Http status 502 — error response received from gateway 0x80244022 SUS_E_PT_HTTP_STATUS_SERVICE_UNAVAIL Http status 503 — temporarily overloaded (0x80244022) 0x80244023 SUS_E_PT_HTTP_STATUS_GATEWAY_TIMEOUT Http status 504 — timed out waiting for gateway 0x80244024 WU_E_PT_HTTP_STATUS_VERSION_NOT_SUP Http status 505 — HTTP version not supported 0x80244025 SUS_E_PT_FILE_LOCATIONS_CHANGED Server replied with FileLocationsChange Caller should refresh its internal state then repeat the call to Protocol Talker 0x80244026 SUS_E_PT_REGISTRATION_NOT_SUPPORTED Client doesn’t support registration with non-SUS server 0x80244027 WU_E_PT_NO_AUTH_PLUGINS_REQUESTED Server returned an empty AuthInfo list 0x80244028 SUS_E_PT_NO_AUTH_COOKIES_CREATED The client was unable to create any valid auth cookies 0x80244029 WU_E_PT_INVALID_CONFIG_PROP One of the Config ConfigurationProperty values was wrong 0x8024402a WU_E_PT_CONFIG_PROP_MISSING One of the Config ConfigurationProperty values was wrong 0x8024402b WU_E_PT_HTTP_STATUS_NOT_MAPPED Http status other than 200, but not mapped above 0x8024402c WU_E_PT_WINHTTP_NAME_NOT_RESOLVED Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name can not be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED. Stop/Restart service or reboot the machine if you see this error frequently. 0x80244fff WU_E_PT_UNEXPECTED generic unexpected protocol talker failure 0x80245001 WU_E_REDIRECTOR_LOAD_XML The XML extracted from the wuredir.cab failed to load into the DOM 0x80245002 WU_E_REDIRECTOR_S_FALSE An expected XML element node, map, attribute, value, etc. could not be found. 0x80245003 WU_E_REDIRECTOR_ID_SMALLER The redirectorId in the downloaded wuredir.cab is smaller than the cached cab. 0x8024502d WU_E_PT_SAME_REDIR_ID During recovery Protocol Talker failed to download a wuredir.cab with a newer redirectorId from the server 0x8024502e WU_E_PT_NO_MANAGED_RECOVER A redirector recovery action was specified, but the server is managed. 0x80245fff WU_E_REDIRECTOR_UNEXPECTED generic unexpected redirector failure 0x80246001 SUS_E_DM_URLNOTAVAILABLE The requested file does not have an URL 0x80246002 SUS_E_DM_INCORRECTFILEHASH The file digest did not match the expected value 0x80246003 WU_E_DM_UNKNOWNALGORITHM The file metadata requested an unknown hash algorithm 0x80246004 WU_E_DM_NEEDDOWNLOADREQUEST A download request from a download handler is required. 0x80246005 SUS_E_DM_NONETWORK Network connection was not available 0x80246006 SUS_E_DM_WRONGBITSVERSION The version of BITS installed on the machine is not compatible. 0x80246007 SUS_E_DM_NOTDOWNLOADED The update has not been downloaded. 0x80246008 SUS_E_DM_FAILTOCONNECTTOBITS Failed to create the IBackgroundCopyManager interface to BITS. The BITS service may have been disabled 0x80246009 WU_E_DM_BITSTRANSFERERROR A BITS transfer error occurred, but the exact error could not be retrieved. 0x80246fff WU_E_DM_UNEXPECTED generic unexpected download manager failure 0x80248000 WU_E_DS_SHUTDOWN The call failed because the SUS agent is shutting down 0x80248001 WU_E_DS_INUSE The call failed because the data store is in use and the operation can only be executed on an idle data store. 0x80248002 WU_E_DS_INVALID The data store is in an invalid state. This can occur if we attempt to validate the database schema and find a mismatch between the current state and the state we expect. 0x80248003 WU_E_DS_TABLEMISSING The data store has a missing table 0x80248004 WU_E_DS_TABLEINCORRECT The data store has a table whose columns are not what SUS expects 0x80248005 WU_E_DS_INVALIDTABLENAME The caller tried to open a table that is not in the datastore 0x80248006 WU_E_DS_BADVERSION The data store’s version does not match what the client expects 0x80248007 SUS_E_DS_NODATA The caller asked for data that is not in the data store 0x80248008 WU_E_DS_MISSINGDATA The data store is in an invalid state because data that should be present is missing. This error can occur if we encounter a column in a table that is NULL when it is not allowed to be NULL. 0x80248009 WU_E_DS_MISSINGREF The data store is in an invalid state because data that should be present is missing. This will occur if we try to fetch a linked row from another table and the linked row does not exist. This can happen with EULAs, files, and/or localized properties referenced by an update. 0x8024800a WU_E_DS_UNKNOWNHANDLER The caller attempted to add an update that used an unknown update handler 0x8024800b WU_E_DS_CANTDELETE The caller attempted to delete an update that is referenced by one or more services 0x8024800C SUS_E_DS_LOCKTIMEOUTEXPIRED The caller attempted to delete an update that is referenced by one or more services 0x8024800d WU_E_DS_NOCATEGORIES The caller attempted to add a non-toplevel category update that contained no parent categories 0x8024800e WU_E_DS_ROWEXISTS The caller attempted to add a row whose primary key matched an existing row 0x8024800f WU_E_DS_STOREFILELOCKED We attempted to initialize the datastore, but it was locked by another process 0x80248010 WU_E_DS_CANNOTREGISTER The caller is attepting to register the datastore with COM, but the store cannot be loaded into the current process 0x80248011 SUS_E_DS_UNABLETOSTART Could not create an out of proc datastore object 0x80248012 SUS_E_DS_MISSINGFILEFORURL a file URL was passed in for a file that does not exist in the datastore 0x80248013 SUS_E_DS_DUPLICATEUPDATEID the server has passed the same update to the client with two different revision ids 0x80248014 WU_E_DS_UNKNOWNSERVICE the caller has requested some action on a service that is not known to the datastore 0x80248015 SUS_E_DS_SERVICEEXPIRED the caller has requested a service whose registration has expired 0x80248016 WU_E_DS_DECLINENOTALLOWED an update cannot be declined while it is deployed with a deadline by 1 or more services or if it is a mandatory update 0x80248017 WU_E_DS_TABLESESSIONMISMATCH the caller attempted to close a table with a session it was not associated with 0x80248018 WU_E_DS_SESSIONLOCKMISMATCH the caller attempted to close a table with a session it was not associated with 0x80248019 WU_E_DS_NEEDWINDOWSSERVICE the caller attempted to remove the windows update service without having another service configured that delivers updates to windows 0x8024801a WU_E_DS_INVALIDOPERATION The attempted operation was not allowed 0x8024801b WU_E_DS_SCHEMAMISMATCH The schema of a table in a backup XML file cannot be reconciled with the current store schema 0x8024801c WU_E_DS_RESETREQUIRED The datastore required a reset and either the state of the current session was too complex to retry (it is in a caller initiated transaction or a caller acquired a section lock) or the reset failed. In either case, the only option is to release the session and try again with a newly acquired session. Once a session returns this error, it will always return this error. 0x8024801d WU_E_DS_IMPERSONATED The datastore cannot be called while impersonating 0x80248fff WU_E_DS_UNEXPECTED generic unexpected data store failure 0x8024A000 WU_E_AU_NOSERVICE AU was unable to service incoming AU calls 0x8024A001 SUS_E_AU_LEGACYSERVER 0x8024A002 WU_E_AU_NONLEGACYSERVER The legacy AU client stopped because the sus server has been upgraded 0x8024A003 WU_E_AU_LEGACYCLIENTDISABLED The legacy AU client stopped because it was disabled 0x8024A004 WU_E_AU_PAUSED AU was unable to service incoming AU calls because it was paused 0x8024Afff WU_E_AU_UNEXPECTED generic unexpected Automatic Updates 0x8024c001 WU_E_DRV_PRUNED Driver was pruned. 0x8024c002 WU_E_DRV_NOPROP_OR_LEGACY A property wasn’t found. Depending on the context this may not be an error. For example, it is expected that legacy drivers will be missing properties we require (there is no support for legacy drivers). 0x8024c003 WU_E_DRV_REG_MISMATCH The registry type we read didn’t match what was expected 0x8024c004 WU_E_DRV_NO_METADATA The driver Update didn’t have a metadata blob 0x8024c005 WU_E_DRV_MISSING_ATTRIBUTE The driver Update metadata was missing a required attribute 0x8024c006 WU_E_DRV_SYNC_FAILED A driver sync operation failed 0x8024c007 WU_E_DRV_NO_PRINTER_CONTENT No printer driver content following SyncApplicablePrinters 0x8024cfff WU_E_DRV_UNEXPECTED generic unexpected driver utility failure 0x8024d001 WU_E_SETUP_INVALID_INFDATA Setup failed due to invalid data in the INF file. 0x8024d002 WU_E_SETUP_INVALID_IDENTDATA Setup failed due to invalid data in the wuident file. 0x8024d003 WU_E_SETUP_ALREADY_INITIALIZED Setup failed due to multiple initialization. 0x8024d004 WU_E_SETUP_NOT_INITIALIZED Setup has not been initialized correctly. 0x8024d005 WU_E_SETUP_SOURCE_VERSION_MISMATCH Setup failed as the version specified in the INF file doesn’t match the source binary version. 0x8024d006 WU_E_SETUP_TARGET_VERSION_GREATER Setup failed as the target version on the system is higher than source binary version. 0x8024dfff WU_E_SETUP_UNEXPECTED Generic unexpected Setup failure. 0x8024e001 WU_E_EE_UNKNOWN_EXPRESSION an expression handler was passed an expression that it doesn’t know about 0x8024e002 WU_E_EE_INVALID_EXPRESSION an expression handler was passed an expression that is bad. 0x8024e003 WU_E_EE_MISSING_METADATA an expression handler was passed an expression that requires an applicability metadata blob, but did not receive one or received too many. 0x8024e004 WU_E_EE_INVALID_VERSION Invalid version of the serialized expression data. 0x8024e005 WU_E_EE_NOT_INITIALIZED The Expression Evaluator has not been initialized correctly. 0x8024e006 WU_E_EE_INVALID_ATTRIBUTEDATA An invalid attribute data was passed to an expression evaluator. 0x8024efff WU_E_EE_UNEXPECTED generic unexpected expression evaluator failures 0x8024f001 WU_E_REPORTER_EVENTCACHECORRUPT event cache file was corrupt/malformed 0x8024f002 WU_E_REPORTER_EVENTNAMESPACEPARSEFAILED event namespace descriptor XML could not be parsed 0x8024f003 WU_E_INVALID_EVENT event was reported with invalid/malformed data 0x8024f004 WU_E_SERVER_BUSY event was rejected by server because server was too busy 0x8024ffff WU_E_REPORTER_UNEXPECTED generic unexpected reporter failures 0x87FF0001 Error_Label_Unreadable 0x87FF0004 Error_Too_Many_Open_Files The system can not open the file 0x8DDD0001 ErrorNoScripting 0x8DDD0002 ErrorNotAdmin 0x8DDD0003 ErrorDisabled Site timeout waiting for the control. 0x8DDD0004 ErrorControlFailed 0x8DDD0006 ErrorWin2KLessThanSP3 0x8DDD0007 ErrorRebootRequired 0x8DDD000F ErrorIis404 0x8DDD0010 ErrorIis500 0x8DDD0012 ErrorNoFrames 0x8DDD0018 ErrorAUDisabled AU could be disabled, not started etc. BITS could be disabled or not started etc. 0xC0000005 STATUS_ACCESS_VIOLATION 0xC0000006 STATUS_IN_PAGE_ERROR 0xc000001d STATUS_ILLEGAL_INSTRUCTION 0xc000001e STATUS_INVALID_LOCK_SEQUENCE 0xc0000090 STATUS_FLOAT_INVALID OPERATION 0xc0000096 STATUS_PRIVILEGED_INSTRUCTION 0xc00000fd STATUS_STACK_OVERFLOW 0xc000013a STATUS_CONTROL_C_EXIT 0xC0000142 STATUS_DLL_INIT_FAILED 0xC0000194 Status_Not_Found object not found 0xC0000354 Status_Debugger_Inactive An attempt to do an operation on a debug port failed because the port is in the process of being deleted. 0xC8000147 NULL 0xC8000152 MCIERR_Seq_Port_Nonexistent 0xC8000158 NULL 0xC80001FE hrLogWriteFail unable to write to the log file 0xC8000211 hrLogDiskFull 0xC8000240 SE_Auditid_Assign_Special_Priv 0xC80003F3 hrOutOfMemory The computer is out of memory 0xC80003F6 hrOutOfBuffers out of database page buffers 0xC80003FA hrReadVerifyFailure 0xC80003FB Error_No_Log_Space System could not allocate the required space in a registry log 0xC80003FE hrDiskIO 0xC8000442 CS_Event_reg_Operations_Failed 0xC800044E hrWriteConflict The write lock failed due to an outstanding write lock 0xC8000710 hrDiskFull 0xD0000005 ERROR_ACCESS_DENIED 0xD0000006 Error_Invalid_Handle 0xD0000008 ERROR_NOT_ENOUGH_MEMORY not enough storage is available to process this command 0xD0000017 Error_CRC 0xD0000018 Error_Bad_Length the program issued a command but the command length is incorrect 0xD000001D Error_Write_Fault the system cannot write the specified device 0xD0000022 Error_Wrong_Disk 0xD000012D HTTP_Status_Moved Object Permanently moved 0xD0000135 MCIErr_Set_Drive 0xD000013A NULL 0xD0000142 MCIERR_Wave_Inputsinuse 0xD0000194 HTTP_Status_Not_Found 0xD0000354 NULL 0xe0000101 ERROR_SECTION_NOT_FOUND 0xe0000201 ERROR_CLASS_MISMATCH 0xe0000203 ERROR_NO_DRIVER_SELECTED 0xe000020b ERROR_NO_SUCH_DEVINST 0xe000020d ERROR_INVALID_CLASS_INSTALLER 0xe0000217 ERROR_BAD_SERVICE_INSTALLSECT 0xe0000219 ERROR_NO_ASSOCIATED_SERVICE 0xe000022b ERROR_DI_DONT_INSTALL 0xe000022d ERROR_NON_WINDOWS_NT_DRIVER 0xe000022f ERROR_NO_CATALOG_FOR_OEM_INF 0xe0000230 ERROR_DEVINSTALL_QUEUE_NONNATIVE 0xe0000234 ERROR_DRIVER_NONNATIVE 0xe000023a ERROR_PNP REGISTRY_ERROR 0xFFFFF8F0 JET_errDiskFull 0xFFFFFb40 JET_errAttachedDatabaseMismatch 0xFFFFFb4a JET_errDatabaseCorrupted 0xFFFFFBBE JET_errInstanceUnavailable 0xFFFFFBF8 JET_errFileAccessDenied 0xFFFFFC01 NULL 0xFFFFFC02 JET_errDiskIO 0xFFFFFC06 JET_errReadVerifyFailure 0xFFFFFC0D JET_errOutOfMemory 0xFFFFFdc9 JET_errDbTimeTooNew 0xFFFFFdda JET_errDatabaseInconsistent 0xFFFFFDEC NULL 0xFFFFFDfd JET_errInvalidLogSequence 0xfffffe02 JET_errLogWriteFail 0xfffffe0b JET_errLogFileCorrupt 0xffffff99 JET_errOutOfThreads 0xFFFFFFFF Cancel 800A01AD ActiveX component can»t create object 0xc8000222 Решение ошибки