Your internet connection seems to be not permitted or dropped out как исправить

  • #1

Доброго времени суток, столкнулся с проблемой, которую решить самостоятельно не получилось. Пробовал 2 варианта. Скачивать лаунчер с сайта и внедрять его в папку с игрой, и второй — скачал полный клиент сируса.
Итог 1: Лаунчер выдает ошибку «your internet connection seems to be not permitted or dropped out«. На этом установка заканчивается.
Второе: Игра запускается через файл «NoLauncherStart«, однако, проведя в игра 2-3 минуты, дисконектит в окно ввода логин-пароля.
Очень жду помощи, потому что мне

понравилась

идея вашего проекта!

  • Снимок.PNG

    Снимок.PNG

    9.3 КБ

    · Просмотры: 14

Nochi-x10


  • #2

Приветствую. Откройте Internet Explorer > «Сервис» > «Свойства обозревателя» > перейдите во вкладку «Дополнительно» > установите галочку на «Использовать TLS 1.2» > нажмите Retry в окне Inetc plug-in > Дождитесь окончания установки лаунчера

  • #3

Извините, можно сделать это через другой браузер, так как с запуском эксплорера возникают некоторые проблемы. Можно это сделать через яндекс, или только через iexplorer?

Nochi-x10


  • #4

Только через Internet Explorer. Какие у Вас с ним проблемы?

  • #5

Его просто нет. Скачиваю его 11 версию. После установки он пишет либо что стоит уже более поздняя версия, либо перезапустить компьютер. При этом ярлык на рабочем столе отсутствует и через поиск его не ищет. Перезапускал ПК, его так же просто нет. ОС W10.

Флорин-x2


  • #6

Здравствуйте!

Откройте «Панель управления» > «Свойства браузера» > перейдите во вкладку «Дополнительно» > установите галочку на «Использовать TLS 1.2» > нажмите «Повтор» в окне Inetc plug-in > Дождитесь окончания установки лаунчера.

  • #7

Все равно выскакивает ошибка.

  • 1.PNG

    1.PNG

    26.3 КБ

    · Просмотры: 6

Флорин-x2


  • #8

Эта же ошибка выскакивает?

  • #10

Перезагрузите комп. Проверьте.
Если все осталось так же —

Попробуйте установить фикс от майкрософта

154003

Он принудительно делает TLS протокол в качестве «дефолтного» в системе.
Возможно опять надо перезагрузить комп после этого.

  • #11

Скачал фикс, вот что получается в процессе установки. На этом процесс завершается.

  • Снимок3.PNG

    Снимок3.PNG

    68.1 КБ

    · Просмотры: 5

  • #12

Скачал фикс, вот что получается в процессе установки. На этом процесс завершается.

Странно :) Что же это за Виндоуз у вас?

Пробуйте ручную установку лаунчера, по совету Vemo отсюда
1) Закройте лаунчер;
2) Удалите папки лаунчера:

C:UsersИМЯПОЛЬЗОВАТЕЛЯAppDataLocalsirus-open-launcher-updater
C:UsersИМЯПОЛЬЗОВАТЕЛЯAppDataLocalProgramssirus-open-launcher
C:UsersИМЯПОЛЬЗОВАТЕЛЯAppDataRoamingSirus Launcher

Что делать, если папка AppData невидимая?

3) Скачайте SirusLauncher-1.2.18.exe и архив с файлами лаунчера для подходящий разрядности ОС:

4) Разместите два скачанных файла в директорию с игрой (где находятся ярлыки NoLauncherStart и START);
5) Отключитесь от сети Интернет;
6) Запустите скачанный файл SirusLauncher-1.2.18.exe от имени администратора и дождитесь окончания установки;
7) Включите Интернет, проверьте работоспособность лаунчера, в настройках укажите путь к папке с игрой.

  • #13

Все запустилось, загрузилось, могу играть. Спасибо вам большое, свою работу вы выполнили на 100%!

  1. Settings

Last updated: Oct 2nd 2020

Here it is a solution to the first 3 most common issues:

Installation error: “Your internet connection seems to be not permitted or dropped out”

Cause: This error may occur when your computer Operating System is not up to date or your computer date is wrong. Another reason may be that your internet provider is blocking the connection towards github.com which is where the installation files are hosted.

Solution:
Use the offline installer: barcode-to-pc-server.offline-installer.zip
This way the installer will read the installation files directly from your hard disk.

The app says “Unable to connect error”

Cause: If it’s the first time that you’re connecting the app, it may be due to your Firewall and/or Antivirus that may be block the server connection.

Solution: Add the Barcode to PC server executable to the exceptions list of both the Firewall and Antivirus:

  • For the Firewall see here: How to configure the Firewall
  • For the Antivirus we don’t have any tutorial since the procedure is different for each antivirus, but if you’re having issues connecting the app try to temporarily pause all Antivirus software and when you finally identify what was blocking the server, add it to the exceptions list.

The app doesn’t find the server

Cause: The app isn’t connected to the same network of the server or the server isn’t able to announce the service over the local network.

Solution:
Go through this checklist:

  • Make you sure that the smartphone Wi-Fi is enabled
  • Make you sure that computer and smartphone are under the same LAN network
  • Check Firewall and Antivirus as explained above
  • Try to pair the app with the QR Code:
    1. Open the server
    2. Click on the 3-dots menu icon (up-right side)
    3. Click Info, and the connect QR Code should appear
    4. Open the app
    5. Open the menu and tap “Select server”
    6. Tap the scan icon [  ] and scan the QR Code displayed on your computer

Windows 10: Your internet connection seem to be not permitted or dropped out

Discus and support Your internet connection seem to be not permitted or dropped out in Windows 10 Gaming to solve the problem; When i want to install an application, it says your internet connection seem to be not permitted or dropped out even though my network is fine….
Discussion in ‘Windows 10 Gaming’ started by NopeVN, Jan 2, 2022.

  1. Your internet connection seem to be not permitted or dropped out

    When i want to install an application, it says your internet connection seem to be not permitted or dropped out even though my network is fine.

    :)

  2. Edge Search Does Not Permit Change of Region

    I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

    Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
    We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
    I would suggest you to try the below steps and check if it helps.
    Step 1:
    Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

    1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
    2. Select Settings and click on Choose what to clear.
    3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

    Step 2:
    I suggest you to create a new user account and check if the issue occurs.

    1. Go to Settings.
    2. Choose Accounts and then select Family and other users.
    3. Select add someone else on this PC.
    4. Enter a user name and hit next.
    5. Click on Finish.
    6. Sign out from the current Account and Log into the new account.

    Step 3:
    It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

  3. Internet Connection Keeps Dropping

    Hello, are you always connected to the same router — or are you skipping to others? Suggest disabling these settings:

    Your internet connection seem to be not permitted or dropped out [​IMG]

    Also check your channel is not congested, and signal strength is adequate. There are freeware tools which can show you this information.

    You might have to change band (frequency) — and in one scenario where someone was renting a place it was suggested the owner was restricting Wifi bandwidth…!

    I’m sure others more experienced in these issues will comment.

  4. Your internet connection seem to be not permitted or dropped out

    My internet keeps dropping out!

    I suggest you connect your laptop to the router with a ethernet cable. If the wired connection is stable you know that there is nothing wrong with the internet connection itself and with your LAN. Next step would be to go to the website of your laptop manufacturer and look for the latest WLAN drivers. Install them and test whether it improves the reliability of your WLAN connection. Then post back the results.

Thema:

Your internet connection seem to be not permitted or dropped out

  1. Your internet connection seem to be not permitted or dropped out — Similar Threads — internet connection seem

  2. Your internet connection seem to be not permitted or dropped out

    in Windows 10 Software and Apps

    Your internet connection seem to be not permitted or dropped out: When i want to install an application, it says your internet connection seem to be not permitted or dropped out even though my network is fine….
  3. internet connection drops

    in Windows 10 Network and Sharing

    internet connection drops: I have 2 win10 pro desktops one keeps dropping internet connections the other does not. Both are connected to the router by cable. Have tried various setting but none workother devices, friends laptop, iphone, etc connect ok by WiFi…
  4. Internet drop outs

    in Windows 10 Network and Sharing

    Internet drop outs: For about 3 weeks Internet has repeatedly dropped out. Pages won’t load time out or load abnormally slowly Get messages like » the System encountered a problem» or » The site can’t be reached» or «Your connection was interrupted» Checked Event Viewer found repeated ERROR…
  5. Internet Dropping out

    in Windows 10 Network and Sharing

    Internet Dropping out: My windows 10 desk top is connected to my router via cable NOT WI_FI.

    Windows regularly disconnects briefly telling me that there is no internet.

    This is not true because other devices on the same network continue to function.

    Is this a known issue?…

  6. Dropping Internet Connection

    in Windows 10 Network and Sharing

    Dropping Internet Connection: Hi Everyone, hope everyone is well, I wonder if anyone could give me some help, I am asking for my sister as I will be doing the task. She has been having problems with her internet connection, as the laptop keeps dropping her internet connection, I have taken a look at the…
  7. Internet connection keeps dropping out

    in Windows 10 Network and Sharing

    Internet connection keeps dropping out: With out warning connection is lost cause the default Gateway is not available according to the checker.

    Still trying to sort that out and machine keeps crashing and freezing

    Any help would be grateful…

  8. Internet drops out if computer is not connected to power

    in Windows 10 Network and Sharing

    Internet drops out if computer is not connected to power: Hi all,

    My internet drops out if the computer is not connected to power.

    Running the trouble shooter suggests that an ethernet cable is unplugged.

    But I am connected to wifi?…

  9. Surface Internet Connection Dropping Out

    in Windows 10 Network and Sharing

    Surface Internet Connection Dropping Out: My Surface connects to the internet only sporadically, lasting merely minutes. On the other hand, the Apple devices and Android mobiles—and my gaming rig—never drop out. How can I improve my Surface’s connectivity?…
  10. Internet connection dropping

    in Windows 10 Network and Sharing

    Internet connection dropping: Hi,

    Since I upgraded to Windows 10, my internection drops out every time that my laptop is not in continual use. The connection actually says: «connect automatically» but it still goes off every time I leave my laptop for longer than 10 minutes or so. This is frustrating,…

Users found this page by searching for:

  1. اخطار your internet connection seem to be not permitted

    ,

  2. Your internet connection seems to be not permitted or dropped out

    ,

  3. your internet connection seems to have dropped out

    ,

  4. error your internet connection seems to be not permitted our dropped out


Windows 10 Forums

Comments

@marceloavf

  • Electron-builder Version: 19.49.0
  • Electron-updater Version: 2.16.3
  • Target: Windows

When try to install via nsis-web .exe it says:

screenshot_2

screenshot_1

It work when I access the link in the browser and download nicely the nsis.7z but don’t work via .exe
Tried to disable the firewall and anti-virus

The file is signed too

screenshot_3

info.zip

@develar

Interesting… it works for me. Is it working now?

@marceloavf



Copy link


Contributor


Author

Still happens @develar, we tried to disable firewall and anti-virus, but still get the same error.

@mastergberry

Bringing up that this is still an issue (and one I believe I reported a while ago?)

https://prnt.sc/jrbrwu

This user reported that he has a download speed of 50kbps and a pretty bad connection…so I guess the plugin needs some upgrades to handle bad connections a bit better?

@mastergberry

Still having users report this as a problem. Maybe there is a fix in a newer version @develar ?

@AlaShiban

I ran into this issue and it turned out to be a http/https issue. Here’s how I resolved it (for future finders):
In my package.json:
image
Notice the http part — for https I expect valid certificates to play a role in success/failure.

The web server had these files:
image
latest.7z is a copy of my latest build produced from npm run dist

Hope this helps!
Thanks @develar !

@fttx

@fttx
fttx

mentioned this issue

Mar 3, 2019

@liaohui2030

how can i solve this issue? thanks

@stale

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

@lifesboy

Same error. My case is because of wrong time. Update windows time fix it!

@mastergberry

I identified one possible cause my users were having…they didn’t have TLS 1.2 enabled and we force 1.2 for our HTTPS connections.

Just noting it here in case it helps someone else.

@rbesland

Hello everyone,

I have this problem today with this version of packages :
«electron-builder»: «22.13.1»
«electron-updater»: «4.3.9»

I have the exact same error message which is «SendRequest error», which seems to be related with the inetc plugin.

Here is the «build» part of my package.json file.

"build": {
        "publish": [
            {
                "provider": "generic",
                "url": "https://my-website.com/download"
            }
        ],
        "appId": "com.app.test",
        "win": {
            "target": "nsis-web",
            "icon": "src/images/icon.ico"
        },
        "nsisWeb": {
            "oneClick": true,
            "perMachine": false,
            "include": "build/installer.nsh",
            "deleteAppDataOnUninstall": true,
            "allowElevation": false,
            "allowToChangeInstallationDirectory": false,
            "createDesktopShortcut": true,
            "createStartMenuShortcut": true,
            "shortcutName": "My Shortcut Name",
            "runAfterFinish": true
        }
    }

My web server is an enterprise web server with HTTPS valid certificate. The CA of this certificate is a internal CA.
Do you think this can be related to the error I have today?

Is it possible to reopen this case?

Best regards.

@ArmelChesnais

Just wanted to add my +1 to this issue for nsis-web.
My coworkers and I have not come across this ourselves, however a large amount of our users are coming across this error. Unfortunately, most that have come across this are not tech savvy, and so it’s a little difficult for my team to track it down.

We’ve noticed that while we haven’t really heard of this for our North American users, our Brazilian users seem to be the ones who run into this most often, then followed by some other South American countries, and a handful elsewhere in the world.

We’ve tried to change from https to http, but that’s only fixed it for a few of our users, plenty still have this error.

It may be related to timeouts? If the connection takes too long to establish to the servers, INETC may be timing out. Which may be the issue for some of those regions, from our sparse ability to test out hypotheses, though it would need to be confirmed. Perhaps a longer timeout might help (possibly around 30s-1m?), as a waiting a bit for an install isn’t overly problematic.

I’m also not entirely sure if there’s a way for us to modify the timeout duration ourselves. If anyone knows how, it might help us better test out the timeout hypothesis.

@rbesland

Just to give you more information, I fixed the issue by using nsis target instead of nsis-web, with these settings:

{
    "build": {
        "publish": [
            {
                "provider": "generic",
                "url": "https://my-https-website.com/download",
                "channel": "latest",
                "useMultipleRangeRequest": false
            }
        ],
        "appId": "app.test.git",
        "win": {
            "target": "nsis",
            "icon": "src/images/icon.ico"
        },
        "nsis": {
            "oneClick": true,
            "perMachine": false,
            "include": "build/installer.nsh",
            "deleteAppDataOnUninstall": true,
            "allowElevation": false,
            "allowToChangeInstallationDirectory": false,
            "createDesktopShortcut": true,
            "createStartMenuShortcut": true,
            "shortcutName": "My Shortcut",
            "runAfterFinish": true
        }
    }
}

Here are my packages versions.

"electron": "15.3.0"
"electron-builder": "22.13.1"
"electron-updater": "4.3.9"

It is more link a workaround because nsis target is not downloading the .7z package file on installation. But in the case this issue is not resolved, I hope this can help some of you.

Best regards.

@ArmelChesnais

We’ve also opted to go with nsis instead of nsis-web. However, for differential updates, this does imply that the amount to download is doubled, whereas this wasn’t an issue for nsis-web.

We’re currently programmatically separating 32 and 64bit packaging right now to generate two separate installers of nsis as a result, as by default they’re combined for a single 32/64 installer otherwise.

A solution to this nsis-web issue would be preferable.

mangopearandapples

Posts: 2
Joined: Sat Feb 26, 2011 10:51 pm

Internet Connection not permitted

Hi.
When I run the devkitPro updater, I choose the Minimal System and devkitARM and install.
After it gets up to msys-1.0. 11-RC2.exe, it stops and a prompt comes up:

Your internet connection seems not to be permitted or dropped out!
Please reconnect and resume the installation.

I find nothing wrong with my internet connection so why is this happening?
Is there a installer that doesn’t need the internet?
Thanks.


WinterMute

Site Admin
Posts: 1659
Joined: Tue Aug 09, 2005 3:21 am
Location: UK
Contact:

Re: Internet Connection not permitted

Post

by WinterMute » Sun Feb 27, 2011 11:51 am

There are two main things that cause this issue.

1. Some antivirus products appear to cause the download code to timeout when scanning, unfortunately all we can advise here is to temporarily disable the scanning while installing.

2. The Internet Explorer connection settings are out of date or misconfigured.

Sorry, there’s no installer that doesn’t need the internet but the current one can download files for later offline install.


User avatar

vuurrobin

Posts: 219
Joined: Fri Jul 11, 2008 8:49 pm
Location: The Netherlands
Contact:

Re: Internet Connection not permitted

Post

by vuurrobin » Sun Feb 27, 2011 1:20 pm

you can also download the binaries from the sourceforge page, put them in the same directory as the updater and then run the updater. then it will pick the binaries that you already have downloaded instead of downloading them itself.


mangopearandapples

Posts: 2
Joined: Sat Feb 26, 2011 10:51 pm

Re: Internet Connection not permitted

Post

by mangopearandapples » Sun Feb 27, 2011 1:48 pm

Thanks WinterMute and vuurrobin!
I noticed that AVG had blocked out the installer from using the internet but once I allowed it, it worked!
Thanks again!


User avatar

Izhido

Posts: 107
Joined: Fri Oct 19, 2007 10:57 pm
Location: Costa Rica
Contact:

Re: Internet Connection not permitted

Post

by Izhido » Sun Feb 27, 2011 3:23 pm

AVG strikes again, it seems.

If you accept my suggestion, I’ve found MSE to be faster, and less prone to false positives than AVG, besides being actually royalty-free (instead of just a reduced free version). Replace it as soon as you can.


Who is online

Users browsing this forum: No registered users and 0 guests

Понравилась статья? Поделить с друзьями:
  • Как найти фильм название фильма по картинке
  • Лиса патрикеевна как автор называет лису найди
  • Как в общем анализе крови найти гемоглобин
  • Как по чертежам составить смету на
  • Как репетитору найти учеников на профи ру